Victron Energy Smartshunt 500A-50mv
Victron SmartShunt
Why buy Victron from Canadian Solar Wholesale?
With the IPS company group, we buy directly from Victron Energy. Our warehouse is the only authorized Victron warranty and repair center in Western Canada.
The Smart Battery Shunt
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.
The SmartShunt is available in 500A. The 1000A and 2000A will follow later this year.
To install the MK3-USB driver on a computer without internet, first download the MK3-USB driver using VEConfig3 and install it by selecting the menu Special -> USB Drivers. Only afterward connect it to your computer for the first time.
On computers with internet, Windows will automatically download the correct driver itself.
Victron Energy BMV-712 Smart Battery Monitor
Why buy Victron from Canadian Solar Wholesale?
With the IPS company group, we buy directly from Victron Energy. Our warehouse is the only authorized Victron warranty and repair center in Western Canada.
Victron Energy Smart Battery Monitor
With Bluetooth built-in, the BMV-712 Smart can connect to your smart phone for programming and monitoring.
Features and Specifications:
- Bluetooth inside
- Download the Victron Bluetooth app for smart phones
- Easy to install
- Midpoint voltage monitoring
- Very low current draw from the battery
- Bi-stable alarm relay
- Supply voltage: 6.5 to 70 Volts DC
- Battery capacity: 20 to 9,999 Amp-hours (Ah)
- 500A / 50mV shunt included
- 10 meter cable included
- 5 year warranty
Victron Energy 12/24 V-65A Battery Protect
The Victron Energy 12/24V – 65A BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
The BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current can only flow from the Battery terminal to the Load terminal. In case of use with a load, the battery connects to the Battery terminal, and in case of use with a charger, the charger connects to the Battery terminal.
Peak current:250A
Max cont. load current: 65A
Operating voltage range: 6-35V
Dimensions (hxwxd): 1.6 x 1.9 x 4.2 inch
Also comes in the 100A or 220A which can be purchased by special order.
Why buy Victron from Canadian Solar Wholesale?
With the IPS company group, we buy directly from Victron Energy. Our warehouse is the only authorized Victron warranty and repair centre in Western Canada.
Read the Battery Protect Spec Sheet Here (PDF).
Victron Energy Smart Battery Protect 12/24 V-65A
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
When using Bluetooth to program the Smart Battery Protect, any required engage/disengage levels can be set. Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin.
If required, Bluetooth can be disabled.
The Victron Energy Smart Battery Protect 12/24Volt 65 Amp is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.
Peak current: 250A
Max cont. load current: 65A
Operating voltage range: 6-35V
Dimensions (hxwxd): 1.6 x 1.9 x 4.2 inch
Also comes in the 100A or 220A which can be purchased by special order.
Why buy Victron from Canadian Solar Wholesale?
With the IPS company group, we buy directly from Victron Energy. Our warehouse is the only authorized Victron warranty and repair centre in Western Canada.
Read the Smart Battery Protect 12/24 Volt 65A Spec Sheet Here (PDF).