Inverter chargers typically have a built in transfer switch that will sense when you are plugged into an AC source such as shore power or a generator.

When AC is recognized by the inverter charger, the unit will act as a pass through, power your devices from the AC source and also charge the batteries if desired.

When the inverter charger detects a loss of AC, the unit will switch over to invert or DC mode and power your devices off of the batteries that the power inverter has been charging.

Showing all 9 results

Show sidebar
ioata dls-55
Close

Iota DLS-55

$242.75

The DLS-55 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging.

As a power supply, the unit’s tightly controlled regulation allows the user to operate a nominal 12VDC load up to 55 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-55 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.

Two year warranty.

Add to cart
iota dls-75
Close

Iota DLS-75 2 Pack with Smart Charger Module

$757.40

The DLS-75 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging.

As a power supply, the unit’s tightly controlled regulation allows the user to operate a nominal 12VDC load up to 75 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-75 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.

Two year warranty.

Add to cart
iota dls-75
Close

Iota DLS27-40

$422.55

The DLS-27-40 Battery Charger/Power Converter from IOTA Engineering converts nominal 120V AC voltage to 27.2V D.C.

As a power supply, its tightly controlled regulation allows the user to operate any appropriate nominal DC load up to the converter’s rated output current.

As a battery charger, the DLS-27-40 will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time that minimizes undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the converter will float-charge the battery to prevent self-discharge of its cells.

Two year manufacturers warranty.

Add to cart
Sale
iota dls-75
Close

Iota DLS-75

$363.64 $345.00

The DLS-75 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging.

As a power supply, the unit’s tightly controlled regulation allows the user to operate a nominal 12VDC load up to 75 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-75 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.

Two year warranty.

Add to cart
iota dls-45
Close

Iota DLS-45

$229.98

The DLS-45 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging.

As a power supply, the unit’s tightly controlled regulation allows the user to operate a nominal 12VDC load up to 45 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-45 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.

Two year warranty.

Add to cart
iota dls-30
Close

Iota DLS-30

$200.49

The DLS-30 Power Converter/Battery Charger from IOTA Engineering converts nominal 120 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging.

As a power supply, the unit’s tightly controlled regulation allows the user to operate a nominal 12VDC load up to 30 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-30 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.

Two year warranty.

Add to cart
iota-iq-smart-controller
Close

Charger Module

$25.06

The IQ Smart Controller is compatible with any DLS Battery Charger model. The IQ Controller allows the DLS Charger to operate as an automatic 3-stage “smart charger.” This gives the customer the benefit of Bulk, Absorption, and Float stage charging, increasing the charging capacity of the DLS charger and decreasing charge times, insuring proper and safe battery charging and minimizing over-charging. This “smart” technology monitors the battery at all times. If the DLS voltage remains in the long term stage for more than seven days, the IQ will automatically deliver a boost charge for a predetermined time, then automatically return to the normal float stage.

In photo: Charger not included.

Add to cart
PD52 240 VAC 50-Amp Automatic Transfer Switch
Close

50 amp Transfer Switch

$216.22

PD52 240 VAC 50-Amp Automatic Transfer Switch

Automatically senses generator power and prevents two power sources from entering the AC Distribution Panel at the same time.

240 VAC 50-Amp Switch, AC Connectors: Screw-type wiring Terminals.

Features:

  •  Time delay circuit board ensures generator voltage is at a stable level before transfer occurs.
  • Rugged, heavy duty, screw type wiring terminals ready to wire to contactor base, ensures ease of wiring and prevents wiring errors.
  • Easy to remove protective cover with wiring schematic inside.
  • Available in metal.
  • AC Detect option for auto generator start compatibility.
  • 70 Amp neutral rating.
  • 1 year limited manufacturers warranty.
Add to cart
30amp transfer switch
Close

30 amp Transfer Switch

$114.92

PD5110610 120 VAC 30-Amp Automatic Transfer Switch
120 VAC, 30 Amps, AC Connectors: screw terminals.

Automatically senses generator power and prevents two power sources from entering the AC Distribution Panel at the same time.

Features:

  • Quick change circuit board is easily replaced in the event of failure. No need to disconnect and reinstall the entire unit.
  • Time delay feature ensures generator voltage is at a stable level before transfer occurs.
  • Built-in strain reliefs allow the installer to simply push the branch circuit wires inside the unit for connection. Eliminates the need to purchase and install separate strain reliefs for each circuit.
  • Screw-type wiring terminals ensure ease of wiring and prevents wiring errors.
  • 1 year limited manufacturers warranty.
Add to cart