Magnum Energy Remote Control ME-RC50
The ME-RC50 is simple to use, yet allows full set-up of all the adjustable parameters available in the ME, MM, MMS, MS, and RD Series inverters. The remote offers multiple functions in one place, including: inverter on/off, charger on/off, shore power breaker settings, AGS control, meter button, setup, and technical menus. The ME-RC50 also has the option of controlling the ME-BMK Battery Monitor Kit using a network connection to the inverter. This remote has convenient finger-tip operation, including the new one-knob programming.
The ME-RC50 info sheet can be found under “Manuals” on our site.
Magnum Energy Auto Gen Start
The ME-AGS-N is setup and operated through a Magnum Energy Inverter and the ME-RC50 or ME-ARC50 remote.
When using the ME-RC50 Remote, the ME-AGS-N has basic adjustments such as starting on battery voltage or temperature.
When using the ME-ARC50 remote, the ME-AGS-N has advanced start and stop settings based on: Time of day, battery state of charge, battery voltage, high temperature, or inverter load amps. Also includes the ability to manually turn the generator ON and OFF, generator exercise, warm-up and cool-down.
Starts most diesel or gas generators.
The ME-AGS-N spec sheet can be found under “Manuals” on our site.
ME RTR Magnum Energy Router
The ME RTR Magnum Energy router offers similar features as the ME-ARC50, but has the extra features required to run Magnum MS-PAE or MS-PE inverter/chargers in parallel.
The router is designed to effortlessly connect multiple inverter/chargers in parallel without
the need to program each inverter. The router can connect up to: four MS-PAE or MS-PE
inverter/chargers in parallel, two AGS modules, six BMKs, and one remote control.
Magnum Energy Battery Monitor Kit
The Battery Monitor Kit from Magnum Energy gives you a “fuel gauge” type of meter for your battery bank. It monitors the battery bank and reports the percentage state of charge, real time amps, voltage, amp-hours in/out, and the minimum/maximum DC volts.
The Battery Monitor Kit includes the sense module, sense and communication cables, and a 500 amp shunt.
The ME-BMK requires a Magnum Inverter with a “Network” port and a ME-RC50 remote with revision 2.0 or higher.
The ME-BMK info sheet can be found under “Manuals” on our site.
Interested in Magnum Energy Inverters? Click here: Magnum Energy Inverters
Magnum Energy Advanced Remote Control ME-ARC50
The ME-ARC50 remote control has all the features of the standard ME-RC remote control and also allows the advanced features of the inverter, charger, and any connected accessory to be configured. This LCD remote control also provides advanced monitoring/troubleshooting and includes a FAVS button to access your favorite features/settings quickly.
The ME-ARC50 is simple to use, yet allows full set-up of all the standard and advanced features available in Magnum inverters. The ME-ARC also has the option of controlling the advanced features of the ME-AGS-N Automatic Gen Start and the ME-BMK Battery Monitor Kit using a network connection to the inverter. This remote has convenient finger-tip operation, including the new one-knob programming.
The ME-ARC50 spec sheet can be found under “Manuals” on our site.
Sol-Ark 12K All-in-One Inverter System
Sol-Ark All-In-One Battery System
INDOOR/OUTDOOR EASY INSTALL
- Sol-Ark 12K’s All-In-One design is twice as fast to install.
- Two MPPT Charge Controllers,
- 9kW continuous / 20kW peak inverter,
- Built in remote monitoring
Works With or Without Batteries
AC/ DC COUPLING | DC TRANSFORMLESS
- supports simultaneous DC and AC coupling up to a combined 13kW of PV.
- Boosts PV energy 10-20% without increasing PV array size
- Reduces storage inverter costs up to 30%
FLEET MANAGEMENT
- Remote access monitoring and system adjustments
WARRANTY & RELIABILITY
- 10 year warranty with live support 7 days a week
The all-in-one solar generator system, with its color-touch display, can be used off-grid or on-grid. This revolutionary solar hybrid inverter is stackable up to 72 kW, and at 20kW peak power, it becomes truly limitless!
Sol-Ark 12k All-in-One Spec. Sheet.
Magnum Energy Battery Monitor Kit w/o Shunt
The Battery Monitor Kit from Magnum Energy gives you a “fuel gauge” type of meter for your battery bank. It monitors the battery bank and reports the percentage state of charge, real time amps, voltage, amp-hours in/out, and the minimum/maximum DC volts.
The Battery Monitor Kit includes the sense module, sense and communication cables, and a 500 amp shunt.
The ME-BMK requires a Magnum Inverter with a “Network” port and a ME-RC50 remote with revision 2.0 or higher.
Interested in Magnum Energy Inverters? Click here: Magnum Energy Inverters
Magnum Energy Remote Control
The ME-RC50 is simple to use, yet allows full set-up of all the adjustable parameters available in the ME, MM, MMS, MS, and RD Series inverters. The remote offers multiple functions in one place, including: inverter on/off, charger on/off, shore power breaker settings, AGS control, meter button, setup, and technical menus. The ME-RC50 also has the option of controlling the ME-BMK Battery Monitor Kit using a network connection to the inverter. This remote has convenient finger-tip operation, including the new one-knob programming.
The ME-RC50 info sheet can be found under “Manuals” on our site.
Magnum Energy Auto Gen Start – Standalone
Auto Generator Start – Stand Alone
ME-AGS-S
The ME-AGS-S Auto Generator Start Controller (AGS Controller – Standalone Version) – The ME-AGS-S is the ‘standalone’ version of Magnum Energy’s Automatic Generator Start (AGS) controllers. This auto generator start controller can automatically start your generator based on battery voltage or high temperature.
Adjustable settings include: run time, start volts DC, start temp, quiet time, and 24 hour clock. Works with ME Series, MM Series, MMS Series, MS Series, MS-PAE Series and RD Series. ME-AGS-S kit includes: AGS module, Remote on/off/test switch, switch bezel, a 25′ 6-wire cable, and has basic adjustments starting on battery voltage or temperature.
*The ME-AGS-S does not require an inverter / charger.
Imagine being able to enjoy a day away all-the-while knowing your living space will stay cool and comfortable and your batteries will stay charged and ready for all of the activities that make up daily life. There’s nothing better than returning to a nice, cool, comfortable home with charged batteries after a day away. The Magnum Auto Gen Start (AGS) can make this happen.
The Magnum AGS is compatible with most major generators, including Onan, Powertech, Generac, Westerbeke, Kohler, EPS, Northern Lights, and most portable generators with electric start.