Showing 1–12 of 15 results

Show sidebar
SaleHot
Victron BMV-712 Smart Battery Monitor
Close

Victron Energy BMV-712 Smart Battery Monitor

$314.78 $270.00

Victron Energy Smart Battery Monitor

With Bluetooth built-in, the BMV-712 Smart can connect to your smart phone for programming and monitoring.

Features and Specifications:

  • Bluetooth inside
  • Download the Victron Bluetooth app for smart phones
  • Easy to install
  • Midpoint voltage monitoring
  • Very low current draw from the battery
  • Bi-stable alarm relay
  • Supply voltage: 6.5 to 70 Volts DC
  • Battery capacity: 20 to 9,999 Amp-hours (Ah)
  • 500A / 50mV shunt included
  • 10 meter cable included
  • 5 year warranty

Victron Energy MultiPlus 24/3000/70-50 120V VE.Bus

$2,181.67 $1,700.00

Multi-functional
The Victron Energy MultiPlus 24/3000/70-50 120V VE.Bus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 5000VA per module.

Unique PowerAssist feature
The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Uninterrupted AC power (UPS function)
In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.

SaleHot
Smartsolar 250 100 TR
Close

Victron Energy SmartSolar MPPT 250/100-TR Solar Charge Controller

$1,369.88 $1,250.00

The Victron Energy SmartSolar MPPT 250/100-TR Solar Charge Controller gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by Bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

By adding the SmartSolar Control Display you will be able to check the status of your Charger and battery-storage at a glance. Simply plug it into the face of your MPPT charger to provide you with real-time monitoring and set-up capabilities.

Features and Specifications:

– Ultra-fast Maximum Power Point Tracking (MPPT)
– Advanced Maximum Power Point Detection in case of partial shading conditions
– Outstanding conversion efficiency
– Flexible charge algorithm
– Internal temperature sensor
– Bluetooth Smart built-in: dongle not needed
– Programmable relay
– Optional: pluggable LCD display
– 5 year warranty

 

SaleHot
Victron-Energy-MultiPlus-Compact-12_2000_80_50-120V-VE-Bus
Close

Victron Energy MultiPlus Compact 12/2000/80-50 120V VE.Bus

$1,765.65 $1,515.00

Multi-functional
The Victron Energy MultiPlus Compact 12/2000/80-50 120V VE.Bus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 5000VA per module.

Unique PowerAssist feature
The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Uninterrupted AC power (UPS function)
In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.

SaleHot
Victron MultiPlus-Compact-24_2000_50_50-120V-VE-Bus
Close

Victron Energy MultiPlus Compact 24/2000/50-50 120V VE.Bus

$1,765.65 $1,515.00

Multi-functional
The Victron Energy MultiPlus Compact 24/2000/50-50 120V VE.Bus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 5000VA per module.

Unique PowerAssist feature
The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Uninterrupted AC power (UPS function)
In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.

SaleHot
Victron-Energy-Smart-Solar-MPPT-150-100-Tr
Close

Victron Energy SmartSolar MPPT 150/100-Tr Solar Charge Controller

$1,173.02 $1,108.51

The Victron Energy SmartSolar MPPT 150/100-Tr Solar Charge Controller gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by Bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

By adding the SmartSolar Control Display you will be able to check the status of your Charger and battery-storage at a glance. Simply plug it into the face of your MPPT charger to provide you with real-time monitoring and set-up capabilities.

Features and Specifications:

– Ultra-fast Maximum Power Point Tracking (MPPT)
– Advanced Maximum Power Point Detection in case of partial shading conditions
– Outstanding conversion efficiency
– Flexible charge algorithm
– Internal temperature sensor
– Bluetooth Smart built-in: dongle not needed
– Programmable relay
– Optional: pluggable LCD display
– 5 year warranty

 

SaleHot
Victron MultiPlus-12V-3000VA-120A
Close

Victron Energy MultiPlus 12/3000/120-50 120V VE.Bus

$2,181.67 $1,700.00

Multi-functional
The Victron Energy MultiPlus 12/3000/120-50 120V VE.Bus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 5000VA per module.

Unique PowerAssist feature
The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Uninterrupted AC power (UPS function)
In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.

SaleHot
Victron SmartSolar MPPT 100/50
Close

Victron Energy SmartSolar 100/50 MPPT solar charge controller

$494.18 $430.00

Victron Energy 50A MPPT Solar Charge Controller

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

Features and Specifications:

  • Bluetooth Smart built-in: dongle not needed
  • VE.Direct data connection
  • Ultra-fast Maximum Power Point Tracking (MPPT)
  • Advanced Maximum Power Point Detection in case of partial shading conditions
  • Outstanding conversion efficiency
  • Flexible charge algorithm
  • Extensive electronic protection
  • Internal temperature sensor
  • Real-time data display options
  • Rated charge current: 50 Amps
  • Max. PV short circuit current: 60 Amps
  • Maximum PV open circuit voltage: 100 Volts
  • Maximum wire size: #6 AWG
  • Weight: 2.87 lbs (1.3 kg)
  • Dimensions (inches / millimeters): 5.12″ x 7.32″ x 2.76″ / 130 x 186 x 70 mm
  • 5 year warranty
SaleHot
SmartSolar-MPPT-150-85-Tr-VE-Can
Close

Victron Energy SmartSolar 150/85 TR VE Can MPPT solar charge controller

$945.00 $920.00

Victron Energy 150/85 TR VE CAN MPPT Solar Charge Controller

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

Features and Specifications:

  • Bluetooth Smart built-in: dongle not needed
  • VE.Direct data connection
  • Ultra-fast Maximum Power Point Tracking (MPPT)
  • Advanced Maximum Power Point Detection in case of partial shading conditions
  • Outstanding conversion efficiency
  • Flexible charge algorithm
  • Extensive electronic protection
  • Internal temperature sensor
  • Real-time data display options
  • Rated charge current: 85 Amps
  • Maximum PV open circuit voltage: 150 Volts
  • 5 year warranty
SaleHot
Victron-SmartSolar-MPPT-250-100-MC4
Close

Victron Energy SmartSolar MPPT 250/100-MC4 Solar Charge Controller

$1,369.88 $1,333.37

The Victron Energy SmartSolar MPPT 250/100-MC4 Solar Charge Controller gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by Bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

By adding the SmartSolar Control Display you will be able to check the status of your Charger and battery-storage at a glance. Simply plug it into the face of your MPPT charger to provide you with real-time monitoring and set-up capabilities.

Features and Specifications:

– Ultra-fast Maximum Power Point Tracking (MPPT)
– Advanced Maximum Power Point Detection in case of partial shading conditions
– Outstanding conversion efficiency
– Flexible charge algorithm
– Internal temperature sensor
– Bluetooth Smart built-in: dongle not needed
– Programmable relay
– Optional: pluggable LCD display
– 5 year warranty

 

SaleHot
Victron 150/60 TR Smartsolar
Close

Victron Energy SmartSolar MPPT 150/60-Tr Solar Charge Controller

$716.14 $676.76

The Victron Energy SmartSolar MPPT 150/60-Tr Solar Charge Controller gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by Bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

By adding the SmartSolar Control Display you will be able to check the status of your Charger and battery-storage at a glance. Simply plug it into the face of your MPPT charger to provide you with real-time monitoring and set-up capabilities.

Features and Specifications:

– Ultra-fast Maximum Power Point Tracking (MPPT)
– Advanced Maximum Power Point Detection in case of partial shading conditions
– Outstanding conversion efficiency
– Flexible charge algorithm
– Internal temperature sensor
– Bluetooth Smart built-in: dongle not needed
– Programmable relay
– Optional: pluggable LCD display
– 5 year warranty

 

Victron Energy MultiPlus Compact 12/2000/80-30 230V VE.Bus

$1,765.65 $1,515.00

Victron Energy MultiPlus Compact 12/2000/80-30 230V VE.Bus

MultiPlus 12 Volt C 12/2000/80

  • PowerContro Yes
  • PowerAssist Yes
  • Transfer switch (A) 30

INVERTER

  • Input voltage range (V DC) 9,5 – 17 V   19 – 33 V    38 – 66 V
  • Output voltage: 230 VAC ± 2%  and Frequency: 50 Hz ± 0,1% (1)
  • Cont. output power at 25°C (VA) (3) 2000
  • Cont. output power at 25°C (W) 1600
  • Cont. output power at 40°C (W) 1400
  • Cont. output power at 65°C (W) 1000
  • Peak power (W) 4000
  • Maximum efficiency (%) 93 / 94
  • Zero load power (W) 9 / 11
  • Zero load power in AES mode (W) 7 / 9
  • Zero load power in Search mode (W) 3 / 4

CHARGER

  • AC Input voltage range: 187-265 VAC, Input frequency: 45 – 65 Hz, Power factor: 1
  • Charge voltage ‘absorption’ (V DC) 14,4 / 28,8 / 57,6
  • Charge voltage ‘float’ (V DC) 13,8 / 27,6 / 55,2
  • Storage mode (V DC) 13,2 / 26,4 / 52,8
  • Charge current house battery (A) (4) 80 / 50
  • Charge current starter battery (A) 4 (12 V and 24 V models only)
  • Battery temperature sensor yes

GENERAL

  • Auxiliary output (5) n. a.
  • Programmable relay (6) Yes
  • Protection (2) a – g
  • VE.Bus communication port for parallel and three phases operation, remote monitoring and system integration
  • General purpose com. port n. a.
  • Remote on-off  Yes
  • Common Characteristics Operating temp. range: -40 to +65°C (fan assisted cooling) Humidity (non-condensing): max 95%

ENCLOSURE

  • Common Characteristics : Material & Colour aluminium (blue RAL 5012), Protection category: IP 21
  • Battery-connection M8 bolts
  • 230 V AC-connection Spring-clamp
  • Weight 12kg
  • Dimensions (hxwxd in mm) 520x255x125

STANDARDS

  • Safety: EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1
  • Emission, Immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
  • Road vehicles: 12V and 24V models: ECE R10-4

Multi-functional
The Victron Energy MultiPlus Compact 12/2000/80-30 230V VE.Bus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 5000VA per module.

Unique PowerAssist feature
The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Uninterrupted AC power (UPS function)
In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.