| Weight | 0.453592 kg |
|---|---|
| Dimensions | 8 × 4 × 4 cm |
200 Amp T Fuse
$ 62.90
200 Amp T Fuse
Additional information
Reviews (0)
You must be logged in to post a review.
Related products
Close
300 Amp T Fuse
300 Amp T Fuse
Close
Main Battery Breaker 175
Midnight’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.
125VDC 3/8″ studs 1.5″
AIC 50,000 at 125VDC
All MidNite circuit breakers hold 100% rated current independent of ambient temperature.
Listed for US & Canada
Close
Long Buss Bar
Four 1/0 & eleven #6 useable wire slots. Comes with two lengths of 10-32 screws. Both copper and aluminum wire is acceptable for use with these busbars.
Photo shows 3 Buss Bars.
Close
Midnite MNPV8HV-Disco 3R
Midnite MNP8HV-Disco 3R
The MidNite Solar MNPV8HV Disco 3R can be re-configured in the field to be used with non-isolated inverters where both the positive and negative need to be disconnected. This also allows these to be used to combine and disconnect two arrays feeding two separate isolated inverters. This disconnecting and standard pre-wired combiner is plug and play, saving both time and money in the field. MidNite Solar’s Rapid Shutdown system, which includes MidNite’s disconnecting combiners, meet the requirement of the 2014 NEC 690.12 code.
Comes with 4 fuses and a single lightening arrestor
5 year Warranty. Made in USA
Listed by ETL for US & Canada
Convertible configuration (field configurable)
Eight strings combined for up to 160 Amps single 230 Amp/600V single pole disconnect)
4 + 4 positive strings, separate PV+ and PV- for use with 2 inverters (2 pole 115 Amp disconnect)
Four strings positive, four strings minus for use with non-isolated inverters (2 pole 115 Amp disconnect)
Disconnect has built in shunt trip with positive feedback.
Birdhouse compatible. Load Break Rated.
Optional PV connected power supply. Optional AC connected power supply for redundancy.
Type 3R aluminum enclosure (no rust, won’t turn to dust)
90o C connections. See thru deadfront & color coded busbar guards included.
Fuseholders (MNTS) installed. 15a/600v fuses installed. 600 volt max.
Close
Lightning Protector 300V
The MidNite Solar Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection.
Protection for Classic and other charge controllers, off grid PV combiners and 120/240 VAC circuits.
Listed by ETL for US & Canada
Close
Lightning Protector 600V
The MidNite Solar Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection.
Protection for gridtie PV combiners and inverter input circuits.
Listed by ETL for US & Canada
Close
Midnite MNPV3 Combiner
MidNite MNPV3 Combiner Enclosure. Gray aluminum type 3R rainproof enclosure with insulating dead front.
For 150 VDC charge controllers & 600 VDC grid tie inverters, accepts 3 150VDC(MNEPV) breakers or 2 600VDC fuse holders.
Breakers/fuse holders sold separately.
5 year Warranty.
Made in USA.
Listed by ETL for US & Canada
Close
400 Amp T Fuse
400 Amp T Fuse
Reviews
There are no reviews yet.