| Weight | 0.453592 kg |
|---|---|
| Dimensions | 8 × 4 × 4 cm |
200 Amp T Fuse
$ 62.90
200 Amp T Fuse
Additional information
Reviews (0)
You must be logged in to post a review.
Related products
Close
Fuse
Goes with MNTS fuse holder. The fuses are, Ferraz Shawmut/Mersen brand, industry standard 10mm x 38mm fuses.
Please specify size when ordering: MNFUSE01-600V, MNFUSE02-600V, MNFUSE04-600V, MNFUSE06-600V, MNFUSE07-600V, MNFUSE08-600V, MNFUSE10-600V, MNFUSE12-600V, MNFUSE15-600V, MNFUSE20-600V, MNFUSE30-600V
CSA Listed & UL listed to UL2579.
Close
Din Rail Breaker DC – 150
MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. SPECIFY AMP SIZE when ordering.
Available sizes: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 15, 20, 30, 40, 50 and 63 amp 150VDC din rail mount breaker.
All MidNite circuit breakers hold 100% rated current independent of ambient temperature.
Listed by ETL for US & Canada
Close
Midnite MNPV6 AC Disco
Midnite MNPV6 AC Disco
Midnite MNPV6 AC Disco enclosure is very versatile. It will work with 1-6 of our 150 volt DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect. You can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. Load Break rated. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick.
Depending upon the model number, you can use:
-
-
- Type 3R environmental rating
- DC 600V (1 circuit Pos or Pos and Neg switched) or DC 150v (6 Circuits) or AC 120v (6 circuits) use the Part no. MNPV6-Disco combiner
- DC 300V (3 circuits) Part #MNPV6-250-Disco combiner
- AC 240v 40 amps (3 circuits) Part #MNPV6-AC Micro-Disco combiner
- AC and DC can be installed in the same box!
Example: 600Vdc 20 amp PV in and 40 amp 240Vac Inverter output
-
Enclosure only
Breakers/fuse holders sold separately.
5 year Warranty. Made in USA
Listed by ETL for US & Canada
Close
Lightning Protector 600V
The MidNite Solar Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection.
Protection for gridtie PV combiners and inverter input circuits.
Listed by ETL for US & Canada
Close
Big Baby Box
The original Baby box has been a huge success in filling an industry need. It does have it’s short comings though as it is a very small enclosure. We have created an enclosure called the Big Baby to over come the Baby Box smallness. This box is at least one inch larger in all dimensions. It also includes a ground box lug and mounting provisions for our short insulated bus bar.
General use enclosure – holds up to 4 13mm wide dinrail breakers from 1-63 amps.
Listed by ETL for US & Canada
Close
Din Rail Breaker DC – 300
MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. SPECIFY AMP SIZE required when ordering.
Available sizes: 7, 10, 12, 15, 20, 30, 50 amp 300VDC din rail mount breaker.
All MidNite circuit breakers hold 100% rated current independent of ambient temperature.
Listed by ETL for US & Canada
Close
Midnite MNPV8HV-Disco 3R
Midnite MNP8HV-Disco 3R
The MidNite Solar MNPV8HV Disco 3R can be re-configured in the field to be used with non-isolated inverters where both the positive and negative need to be disconnected. This also allows these to be used to combine and disconnect two arrays feeding two separate isolated inverters. This disconnecting and standard pre-wired combiner is plug and play, saving both time and money in the field. MidNite Solar’s Rapid Shutdown system, which includes MidNite’s disconnecting combiners, meet the requirement of the 2014 NEC 690.12 code.
Comes with 4 fuses and a single lightening arrestor
5 year Warranty. Made in USA
Listed by ETL for US & Canada
Convertible configuration (field configurable)
Eight strings combined for up to 160 Amps single 230 Amp/600V single pole disconnect)
4 + 4 positive strings, separate PV+ and PV- for use with 2 inverters (2 pole 115 Amp disconnect)
Four strings positive, four strings minus for use with non-isolated inverters (2 pole 115 Amp disconnect)
Disconnect has built in shunt trip with positive feedback.
Birdhouse compatible. Load Break Rated.
Optional PV connected power supply. Optional AC connected power supply for redundancy.
Type 3R aluminum enclosure (no rust, won’t turn to dust)
90o C connections. See thru deadfront & color coded busbar guards included.
Fuseholders (MNTS) installed. 15a/600v fuses installed. 600 volt max.
Close
Midnite MNPV4HV-Disco 3R BSC
Midnite MNP4HV-Disco 3R BSC
The MNPV4HV-DISCO 3R-BSC’s red handle is lockable in the off position.
Type 3R aluminum enclosure (no rust, won’t turn to dust)
90 degrees Celcius terminals
See through dead front & color coded busbar guards included
Meets 2011 NEC
Load Break Rated
Model number MNPV4HV Disco 3R Basic
Warranty – 5 yrs.
Listed by ETL for US
Made in the USA
Enclosure only
Breakers/fuse holders sold separately.
Reviews
There are no reviews yet.