| Weight | 0.453592 kg |
|---|---|
| Dimensions | 8 × 4 × 4 cm |
200 Amp T Fuse
$ 62.90
200 Amp T Fuse
Additional information
Reviews (0)
You must be logged in to post a review.
Related products
Close
200A Replacement T Fuse
200 to 400 amp Replacement Fuse for the Deltec PFB T Fuse
Specify fuse amp when ordering. Available in 200, 300, 350 and 400 amps.
Close
Big Baby Box
The original Baby box has been a huge success in filling an industry need. It does have it’s short comings though as it is a very small enclosure. We have created an enclosure called the Big Baby to over come the Baby Box smallness. This box is at least one inch larger in all dimensions. It also includes a ground box lug and mounting provisions for our short insulated bus bar.
General use enclosure – holds up to 4 13mm wide dinrail breakers from 1-63 amps.
Listed by ETL for US & Canada
Close
Midnite MNPV3 Combiner
MidNite MNPV3 Combiner Enclosure. Gray aluminum type 3R rainproof enclosure with insulating dead front.
For 150 VDC charge controllers & 600 VDC grid tie inverters, accepts 3 150VDC(MNEPV) breakers or 2 600VDC fuse holders.
Breakers/fuse holders sold separately.
5 year Warranty.
Made in USA.
Listed by ETL for US & Canada
Close
Mini DC Breaker Box 175
Our mini DC breaker box is white powder coated aluminum Mini DC Breaker Box with 175A/125VDC breaker and 5 din rail breaker slots or 3 panel mount breaker slots.
Listed by ETL for US & Canada.
Close
Long Buss Bar
Four 1/0 & eleven #6 useable wire slots. Comes with two lengths of 10-32 screws. Both copper and aluminum wire is acceptable for use with these busbars.
Photo shows 3 Buss Bars.
Close
Midnite MNPV8HV-Disco 3R
Midnite MNP8HV-Disco 3R
The MidNite Solar MNPV8HV Disco 3R can be re-configured in the field to be used with non-isolated inverters where both the positive and negative need to be disconnected. This also allows these to be used to combine and disconnect two arrays feeding two separate isolated inverters. This disconnecting and standard pre-wired combiner is plug and play, saving both time and money in the field. MidNite Solar’s Rapid Shutdown system, which includes MidNite’s disconnecting combiners, meet the requirement of the 2014 NEC 690.12 code.
Comes with 4 fuses and a single lightening arrestor
5 year Warranty. Made in USA
Listed by ETL for US & Canada
Convertible configuration (field configurable)
Eight strings combined for up to 160 Amps single 230 Amp/600V single pole disconnect)
4 + 4 positive strings, separate PV+ and PV- for use with 2 inverters (2 pole 115 Amp disconnect)
Four strings positive, four strings minus for use with non-isolated inverters (2 pole 115 Amp disconnect)
Disconnect has built in shunt trip with positive feedback.
Birdhouse compatible. Load Break Rated.
Optional PV connected power supply. Optional AC connected power supply for redundancy.
Type 3R aluminum enclosure (no rust, won’t turn to dust)
90o C connections. See thru deadfront & color coded busbar guards included.
Fuseholders (MNTS) installed. 15a/600v fuses installed. 600 volt max.
Close
Main Battery Breaker 175
Midnight’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.
125VDC 3/8″ studs 1.5″
AIC 50,000 at 125VDC
All MidNite circuit breakers hold 100% rated current independent of ambient temperature.
Listed for US & Canada
Close
Short Buss Bar
(MidNite Short Busbar) Shorter version of the insulated bus bars. These are useful for PV+ input on the narrow OB E-Panel and for a separate PV- bus bar for charge controllers that require them. Four #6 and two 1/0 wire slots.
Photo shows 3 Buss Bars
Reviews
There are no reviews yet.