| Weight | 56 kg |
|---|---|
| Dimensions | 30 × 19 × 43 cm |
Sale
agm battery Surrette/Rolls S6-460
$725.00 $687.70
AGM Battery Description:
The Rolls Surrette S6-460 agm battery features a high cycle life without the need for maintenance. The AGM technology (Absorbed Glass-Mat) keeps the electrolyte (Acid) contained in the glass mats allowing the S6-460AGM (S6460AGM) to not expel any liquids even under severe overcharge. AGM batteries have an extremely low internal resistance giving them a very low self-discharge rate.
Rolls Surrette takes the L-16 size battery to even higher levels by improving the capacity and service life. This battery is heavier than the typical L-16 type, and is unsurpassed in reliability. The Rolls Surrette S6-460 agm battery is a direct AGM replacement for lead acid batteries like the Trojan L16H. The S6-460AGM (S6460AGM) is a six volt battery with a capacity of 460 Amp Hrs. @ 100 Hr. rate or 415 Amp Hrs. @ 20 Hr. rate.
Additional information
Related products
Close
Victron Energy LiFePO4 Battery 200Ah 25.6V Smart
Victron Energy LiFePO4 Battery 200Ah 25.6V Smart
The Victron Energy LiFePO4 Battery 200Ah 25.6V Smart is extraordinarily high-performance batteries. It needs to be used in conjunction with the Victron BMS control system. Lithium-iron-phosphate (LiFePO4 battery or LFP) is the safest of the mainstream li-ion battery types. Check the full specifications of Victron Energy LiFePO4 Battery 200Ah 25.6V Smart below
VOLTAGE AND CAPACITY
- Nominal voltage 25,6V
- Nominal capacity @ 25°C* 200Ah
- Nominal capacity @ 0°C* 160Ah
- Nominal capacity @ -20°C* 100Ah
- Nominal energy @ 25°C* 5120Wh
CYCLE LIFE (capacity ≥ 80% of nominal)
- 80% DoD 2500 cycles
- 70% DoD 3000 cycles
- 50% DoD 5000 cycles
DISCHARGE
- Maximum continuous discharge current 400A
- Recommended continuous discharge current ≤200A
- End of discharge voltage 22V
OPERATING CONDITIONS
- Operating temperature Discharge: -20°C to +50°C, Charge: +5°C to +50°C
- Storage temperature -45°C to +70°C
- Humidity (non-condensing) Max. 95%
- Protection class IP 22
CHARGE
- Charge voltage Between 14V/28V and 14,4V/28,8V (14,2V/28,4V recommended)
- Float voltage 13,5V/27V
- Maximum charge current 400A
- Recommended charge current ≤100A
OTHER
- Max storage time @ 25°C* 1 year
- BMS connection Male + female cable with M8 circular connector, length 50cm
- Power connection (threaded inserts) M8
- Dimensions (hxwxd) mm 317 x 631 x 208
- Weight 56kg
Why lithium-iron-phosphate?
Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of an LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery, therefore, consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.
Rugged
Lead-acid batteries will fail prematurely due to sulfation:
• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).
• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).
LFP batteries do not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for very demanding applications.
Efficient
In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance. The round trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average leadacid battery is 80%. The round trip energy efficiency of a LFP battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state). In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions.
Size and weight
Saves up to 70% in space Saves up to 70% in weight
Expensive?
LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency.
Bluetooth
With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance.
Sale
Close
25.6V – 100Ah Lithium Iron Phosphate (LiFePO4) Battery
25.6V – 100Ah Lithium Iron Phosphate (LiFePO4) Battery
POWERSYNC Energy Solutions has developed a large selection of small form Lithium Iron Phosphate (LiFePO4) batteries which are specifically designed as drop in replacements for standard BDI Group Size lead acid batteries and battery banks.
LiFePO4 batteries represent an advancement in safety due to cell design with advanced battery management systems including under and over voltage, over discharge, over current, over temperature, and short circuit protections which ensures safe and efficient operation.
These batteries offer a significant longer cycle life and longer float/calendar life than lead acid batteries while helping to minimize replacement cost and reduce total cost of ownership.
Features of Lithium Iron Phosphate (LiFePO4) Batteries:
- Longer Cycle Life: Offers a significant longer cycle life and longer float/calendar life than lead acid batteries helping to minimize replacement cost and reduce total cost of ownership. LiFePO4 batteries are designed for 8,000 Cycles at 30% DOD, 5,000 Cycles at 50% DOD, and 3,000 Cycles at 80% DOD. These batteries offer a significant longer cycle life and longer float/calendar life than lead acid batteries while helping to minimize replacement cost and reduce total cost of ownership.
- Higher Power: Delivers twice the power of lead acid batteries, even high discharge rate, while maintaining high energy capacity.
- BMS Protection: Under/Over voltage and current protection ensuring safe and efficient operation.
- Charging: Designed to work with AGM chargers
- Safety: Advanced LiFePO4 cell design includes various safeguards including high temp thermal fuse, flame retardant additive and pressure relief valves.
- Increased Flexibility: LiFePO4 batteries are a drop-in replacement of lead acid batteries. Modular design enables deployment of up to four batteries in series and up to ten batteries in parallel.
- SOC / Fuel Gauge: Optional LED state of Charge display available
- Ultra Low Self Discharge Curve: <1% per monthLong Term
25.6V – 100Ah Lithium Iron Phosphate (LiFePO4) Battery Specifications
| PERFORMANCE SPECIFICATIONS | |
| Nominal Voltage | 25.6V |
| Nominal Capacity | 100 Ah (C5, 25C) |
| Energy | 2,560 Wh |
| Internal Resistance | ≤20mΩ |
| Cycle Life | >5000 @50%DOD >3000 @80%DOD >2000 @100%DOD |
| Months Self Discharge | <3% |
| Efficiency of Charge | 100% @0.5C |
| Efficiency of Discharge | 96~99% @1C |
| CHARGE SPECIFICATIONS | |
| Charge Voltage | 29.2 ± 0.2V |
| Charge Mode | 0.2C to 29.2V, then 29.2V, charge current to 0.02 (CC/CV) |
| Charger Current | 60A |
| Max. Charge Current | 120A |
| Charge Cut-off Voltage | 20V ± 0.2V |
| DISCHARGE SPECIFICATIONS | |
| Continuous Current | 120A |
| Max. Pulse Current | 140A (<3s) |
| Reserve Capacity @25A | 480 Min |
| Reserve Capacity @50A | 240 Min |
| Discharge Cut-off Voltage | 20V ± 0.2V |
| MECHANICAL SPECIFICATIONS | |
| Plastic Case | ABS (Group 8D) |
| Dimensions (in./mm.) | 18.50 x 9.13 x 8.63 in. (470 x 232 x 219 mm) |
| Weight (lbs./kg.) | 77 lbs. (35 kg) |
| Terminal | M8 |
| Protocol (optional) | SMBus/RS485/RS232 |
| SOC (optional) | LED |
| ENVIRONMENTAL SPECIFICATIONS | |
| Charge Temperature | 0C to 45C (32F to 113F) @60±25% Relative Humidity |
| Discharge Temperature | -20C to 60C (-4F to 140F) @60±25% Relative Humidity |
| Storage Temperature | 0C to 40C (32F to 104F) @60±25% Relative Humidity |
| Water Dust Resistance | IP56 |
Close
Vision EVL16 400 Amp hour 6 volt sealed AGM Batteries
Vision EV series batteries use advanced technology with a special designed grid and active material. They use anchored plates and a high impact reinforced polypropylene case which can withstand the most extreme environments and vibrations. The EV series uses a wide range of common commercial battery sizes for ease of fit into applications.
Vision EV Series Dry Cell Batteries provide superior performance, capacities and reliability. Using state of art dry cell technology the EV series is designed for environmentally sensitive areas that require enhanced cycle life capabilities in commercial, industrial, residential, and private applications. The maintenance-free (VRLA) construction and advanced design features makes the EV Series the definitive choice for a wide variety of applications.
Features and Benefits
- Completely sealed valve regulated construction.
- Flame arresting pressure regulated safety sealing valves for safety, operating pressure management and protection against atmospheric contamination(excess oxygen being absorbed by negative plates).
- Computer-aided 99.994% pure heavy-duty lead calcium grid designs.
- Tank formed plates guarantees evenly formed and capacity matched plates.
- Anchored plate groups to guard against vibration.
- Double insulating Micro porous glass fiber separators.
- Measured and Immobilized electrolyte.
- Vacuum filling and weighing processes.
- Advanced technology for efficient gas recombination of up to 99.9% and freedom from electrolyte maintenance.
- High impact reinforced strength copolymer polypropylene cases and flat top designed covers that are rugged and vibration resistant.
- Thermally welded case to cover bonds that eliminate leakage.
- Copper and stainless steel alloy terminals and hardware.
- Multi-terminal options.
- Terminal protectors.
- Removable carry handles.
- Industry leading size and performance options.
- Classified as “NON-SPILLABLE BATTERY” Not restricted for Air (IATA/ICAO) Provision 67, Surface (DOT-CFR-HMR49)or Water (Classified as non-hazardous per IMDG amendment 27) transportation.
- Can be used in multiple orientations (upside down is not recommended).
- Compatible with sensitive electronic equipment.
- Quality Assurance processes with ISO (4400/992579), QS and TUV Certification EMC tested, CE, ETTS Germany (G4M19906-9202-E-16). UL recognized and approved components (MH25860).
- Tellcordia and Bellcore compliant.
Close
12V 150Ah Lead Carbon Batteries
12V 150Ah Lead Carbon Batteries are maintenance free and designed for partial state of charge. SWE12-150 lead carbon batteries provide 2800 cycles @50% depth of discharge.
Contact Us for a Shipping Quote
PSOC Applications
• Off-Grid Cabins, Homes & Grid-Tie Battery Back-up
• Recreational, Electric & Hybrid Vehicles
• Marine Battery Replacement
Lead Carbon Battery Features:
• Specifically Designed for Partial State of Charge Applications
• 2800 cycles @50% Depth of Discharge
• Precision Sealing Technology
• Suitable for Cold Temperature Usage
• 98% Recyclability
Switch to Lead Carbon Batteries SWE12-150 Spec. Sheet
Close
Victron Energy LiFePO4 Battery 12,8V/200Ah Smart
Victron Energy LiFePO4 Battery 12,8V/200Ah Smart
The Victron Energy LiFePO4 Battery 12,8V/200Ah Smart is extraordinarily high-performance batteries. It needs to be used in conjunction with the Victron BMS control system. Lithium-iron-phosphate (LiFePO4 battery or LFP) is the safest of the mainstream li-ion battery types. Check the full specifications of Victron Energy LiFePO4 Battery 12,8V/200Ah Smart below
VOLTAGE AND CAPACITY
- Nominal voltage 12,8V
- Nominal capacity @ 25°C* 200Ah
- Nominal capacity @ 0°C* 160Ah
- Nominal capacity @ -20°C* 100Ah
- Nominal energy @ 25°C* 2560Wh
CYCLE LIFE (capacity ≥ 80% of nominal)
- 80% DoD 2500 cycles
- 70% DoD 3000 cycles
- 50% DoD 5000 cycles
DISCHARGE
- Maximum continuous discharge current 400A
- Recommended continuous discharge current ≤200A
- End of discharge voltage 11V
OPERATING CONDITIONS
- Operating temperature Discharge: -20°C to +50°C, Charge: +5°C to +50°C
- Storage temperature -45°C to +70°C
- Humidity (non-condensing) Max. 95%
- Protection class IP 22
CHARGE
- Charge voltage Between 14V/28V and 14,4V/28,8V (14,2V/28,4V recommended)
- Float voltage 13,5V/27V
- Maximum charge current 400A
- Recommended charge current ≤100A
OTHER
- Max storage time @ 25°C* 1 year
- BMS connection Male + female cable with M8 circular connector, length 50cm
- Power connection (threaded inserts) M10
- Dimensions (hxwxd) mm 297 x 425 x 274
- Weight 42kg
Why lithium-iron-phosphate?
Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of an LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery, therefore, consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.
Rugged
Lead-acid batteries will fail prematurely due to sulfation:
• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).
• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).
LFP batteries do not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for very demanding applications.
Efficient
In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance. The round trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average leadacid battery is 80%. The round trip energy efficiency of a LFP battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state). In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions.
Size and weight
Saves up to 70% in space Saves up to 70% in weight
Expensive?
LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency.
Bluetooth
With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance.
Close
Victron Energy LiFePO4 Battery 12,8V/300Ah Smart
Victron Energy LiFePO4 Battery 12,8V/300Ah Smart
The Victron Energy LiFePO4 Battery 12,8V/300Ah Smart is extraordinarily high-performance batteries. It needs to be used in conjunction with the Victron BMS control system. Lithium-iron-phosphate (LiFePO4 battery or LFP) is the safest of the mainstream li-ion battery types. Check the full specifications of Victron Energy LiFePO4 Battery 12,8V/300Ah Smart below
VOLTAGE AND CAPACITY
- Nominal voltage 12,8V
- Nominal capacity @ 25°C* 300Ah
- Nominal capacity @ 0°C* 240Ah
- Nominal capacity @ -20°C* 150Ah
- Nominal energy @ 25°C* 3840Wh
CYCLE LIFE (capacity ≥ 80% of nominal)
- 80% DoD 2500 cycles
- 70% DoD 3000 cycles
- 50% DoD 5000 cycles
DISCHARGE
- Maximum continuous discharge current 600A
- Recommended continuous discharge current ≤300A
- End of discharge voltage 11V
OPERATING CONDITIONS
- Operating temperature Discharge: -20°C to +50°C, Charge: +5°C to +50°C
- Storage temperature -45°C to +70°C
- Humidity (non-condensing) Max. 95%
- Protection class IP 22
CHARGE
- Charge voltage Between 14V/28V and 14,4V/28,8V (14,2V/28,4V recommended)
- Float voltage 13,5V/27V
- Maximum charge current 600A
- Recommended charge current ≤150A
OTHER
- Max storage time @ 25°C* 1 year
- BMS connection Male + female cable with M8 circular connector, length 50cm
- Power connection (threaded inserts) M10
- Dimensions (hxwxd) mm 347 x 425 x 274
- Weight 51kg
Why lithium-iron-phosphate?
Lithium-iron-phosphate (LiFePO4 or LFP) accumulator is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.
Rugged
A lead-acid fail prematurely due to sulfation:
• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).
• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).
LFP batteries do not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for very demanding applications.
Efficient
In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance. The round trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average leadacid battery is 80%. The round trip energy efficiency of a LFP battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state). In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions.
Size and weight
Saves up to 70% in space Saves up to 70% in weight
Expensive?
LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency.
Bluetooth
With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance.
Close
Victron Energy LiFePO4 Battery 12,8V/60Ah Smart
Victron Energy LiFePO4 Battery 12,8V/60Ah Smart
The Victron Energy LiFePO4 Battery 12,8V/60Ah Smart is extraordinarily high-performance batteries. It needs to be used in conjunction with the Victron BMS control system. Lithium-iron-phosphate (LiFePO4 battery or LFP) is the safest of the mainstream li-ion battery types. Check the full specifications of Victron Energy LiFePO4 Battery 12,8V/60Ah Smart below
VOLTAGE AND CAPACITY
- Nominal voltage 12,8V
- Nominal capacity @ 25°C* 60Ah
- Nominal capacity @ 0°C* 48Ah
- Nominal capacity @ -20°C* 30Ah
- Nominal energy @ 25°C* 768Wh
CYCLE LIFE (capacity ≥ 80% of nominal)
- 80% DoD 2500 cycles
- 70% DoD 3000 cycles
- 50% DoD 5000 cycles
DISCHARGE
- Maximum continuous discharge current 120A
- Recommended continuous discharge current ≤60A
- End of discharge voltage 11V
OPERATING CONDITIONS
- Operating temperature Discharge: -20°C to +50°C, Charge: +5°C to +50°C
- Storage temperature -45°C to +70°C
- Humidity (non-condensing) Max. 95%
- Protection class IP 22
CHARGE
- Charge voltage Between 14V/28V and 14,4V/28,8V (14,2V/28,4V recommended)
- Float voltage 13,5V/27V
- Maximum charge current 120A
- Recommended charge current ≤30A
OTHER
- Max storage time @ 25°C* 1 year
- BMS connection Male + female cable with M8 circular connector, length 50cm
- Power connection (threaded inserts) M8
- Dimensions (hxwxd) mm 240 x 285 x 132
- Weight 12kg
Why lithium-iron-phosphate?
Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.
Rugged
Lead-acid batteries will fail prematurely due to sulfation:
• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).
• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).
LFP batteries do not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for very demanding applications.
Efficient
In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance. The round trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average leadacid battery is 80%. The round trip energy efficiency of a LFP battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state). In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions.
Size and weight
Saves up to 70% in space Saves up to 70% in weight
Expensive?
LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency.
Bluetooth
With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance.
Close
Power-Sonic PS121000 12V 100Ah
Power-Sonic PS121000 12V 100Ah Recharegeable Sealed Lead Acid Battery
Features
• Absorbent Glass Mat (AGM) technology for superior
performance
• Valve regulated, spill proof construction allows safe
operation in any position
• Power/volume ratio yielding unrivaled energy density
• Rugged impact resistant ABS case and cover (UL94-HB)
• Integrated ABS carrying handles for ease of movement
• Approved for transport by air. D.O.T., I.A.T.A., F.A.A.
and C.A.B. certified
• U.L. recognized under file number MH 20845