Description

This 100 Ah LiFePO4 Deep Cycle battery is a 12 V battery in a 6 V form factor that provides you with 3000-5000 life cycles* of power for your outdoor adventures.

*Approximately 75-80% of the battery capacity will remain after 3000 cycles in applications recharging at 0.5C or lower We have seen life spans well over 5000 cycles in our lab testing.*

The 10-year warranty makes it hard to beat! Switch out your heavy lead acids for our 31 lbs. battery! It’s time to get rid of that battery anxiety!

Accepted Voltages:

  • 14.2 – 14.6 for Charging Voltage
  • 13.6 or lower for float voltage

All batteries ship with 18-8 stainless steel 5/16 – 18 1” and 1 ¼” bolts, brass washers, and 18-8 stainless steel nuts with nylok inserts

Drop-in Battle Born replacement that comes along with a 10-year warranty because we want you to know we stand behind you and your investment.

The BBGC2 uses stable LiFePO4 chemical composition in cylindrical cells and the same built-in battery management system (BMS) technology as our other products.

Dimensions: 10.31 × 7.28 × 11.02 in (L x W x H)

Using only the highest quality materials all Battle Born Batteries are designed and assembled in Reno, NV.

Features

This Battle Born Batteries heated battery kit offers you a 100Ah GC2 Heated Battle Born Battery, 1 Heat Battery Kit, and 1 Heat Battery Jumper Wire.

BBGC2H Battery Specifications:

  • 100 Amp Hour 12 Volt Battery
  • LiFePO4 Chemistry
  • Battle Born Internal Heat Technology
  • 3000-5000 Cycles
  • Dimensions: (L x W x H)
    • 10.31″ x 7.28″ x 11.02″
  • 31 lbs.
  • Operating Temp Range:
    • -4°F (-20°C) to 135°F (57.2°C)
  • Water Resistant and Sealed
    (Batteries should not be submerged)
  • Designed and Assembled in the USA
  • Built-in BMS (Battery Management System)
  • Made with Cylindrical Cells

Items in the Heat Battery Kit Include:

  • 1 -SPST Rocker Switch
  • 1 -25’ 18 AWG wire terminated with 0.187 QD and #8 ring lug
  • 1 -25’ 18 AWG wire terminated with 0.187 QD and 5/16 ring lug

Items in the Add-on Kit include:

  • 1 -14-inch 18 AWG wire terminated with two #8 ring lugs
  • 2 -M4 x 5mm long Philip head screws
  • 1 -#8 ring lug
  • 1 -1-inch piece of shrink wrap
Additional information
Weight 15 kg
Dimensions 26.2 × 18.5 × 28 cm