| Weight | 7 kg |
|---|---|
| Dimensions | 48 × 21 × 15 cm |
Previous product
Back to products
Charger Module
$ 25.06
Next product
Midnite Classic 200MPPT
$ 1,148.70
Midnite Classic 150MPPT
$ 1,148.70
The Classic MPPT Charge Controller substantially increases the flexibility, features and range currently found on MPPT controllers. The Classic is the first MPPT controller that has Arc Fault Protection, making this controller the safest available today.
FEATURES:
- 150 operating voltage
- Max current out: 96 amps
- 12-72V battery charging standard with models up to 120V battery bank
- Built in DC-GFP and Arc Fault Detector
- Solar, wind and hydro MPPT modes
- Set up Wizard
- 32 megs of data logging
Listed by ETL for US & Canada
CE Certified Listed
Additional information
Related products
Close
SunLight20
SunLight 20 Controller by Morningstar
The SunLight 20 combines the SunSaver design with an advanced micro controller for automatic lighting control functions.
Features:
- rotary digital switch to select among 10 lighting options.
- A test button flashes red LED to confirm correct rotary switch selection.
- Rated 20 amps at 12 volts.
- Five year warranty.
Close
SunSaver-10L
Sunsaver 10L : a small solar controller for professional and consumer applications.
The SunSaver’s 100% solid state design features
- setpoint accuracy to 35 mV’s,
- low voltage disconnect,
- temperature compensation,
- sealed/flooded battery select,
- and true 0 to 100% pulse width modulation (PWM) duty cycle.
- Rated 10 amps at 12 volts.
- Five year warranty.
Close
SunLight-20
SunLight 20 Controller by Morningstar
The SunLight 20 combines the SunSaver design with an advanced micro controller for automatic lighting control functions.
Features:
- rotary digital switch to select among 10 lighting options.
- A test button flashes red LED to confirm correct rotary switch selection.
- Rated 20 amps at 12 volts.
- Five year warranty.
Hot
Close
Outback FM 80 Mppt Controller
Outback FM80 MPPT Charge Controllers
FLEXmax MPPT Charge Controllers are a great solar charge controller when you require a high performance, efficient and versatile charge controller for your advanced power system.
Features & Attributes
- Easy to use and understand LCD display
- Rated to 80 A DC output current
- Fully adjustable control set points
- Allows use with virtually any battery type
- An optional Mate can be added to allow monitoring and control from up to 300 feet away
- Dimensions (LxWxH): 16.3 × 5.6 × 4 inches
- Weight: 14 lbs
- Five year warranty
SaleHot
Close
Victron Energy SmartSolar MPPT 150/100-Tr Solar Charge Controller
Why buy Victron from Canadian Solar Wholesale?
With the IPS company group, we buy directly from Victron Energy. Our warehouse is the only authorized Victron warranty and repair center in Western Canada.
SmartSolar charge controller
The Victron Energy SmartSolar MPPT 150/100-Tr Solar Charge Controller gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by Bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
By adding the SmartSolar Control Display you will be able to check the status of your Charger and battery-storage at a glance. Simply plug it into the face of your MPPT charger to provide you with real-time monitoring and set-up capabilities.
Features and Specifications:
– Ultra-fast Maximum Power Point Tracking (MPPT)
– Advanced Maximum Power Point Detection in case of partial shading conditions
– Outstanding conversion efficiency
– Flexible charge algorithm
– Internal temperature sensor
– Bluetooth Smart built-in: dongle not needed
– Programmable relay
– Optional: pluggable LCD display
– 5 year warranty
Hot
Close
Outback FM 60 Mppt Controller
The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power. The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively, in ambient temperatures as high as 104°F (40°C).
Included in all of the FLEXmax Charge Controllers are the revolutionary features first developed by OutBack Power, including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button. The integrated OutBack network communications allows FLEXmax series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled complete system integration.
FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.
Features & Attributes
- Dimensions (LxWxH): 13.5 × 5.8 × 4 inches
- Weight: 11.7 lbs
- Designed to work with 12, 24, 36, 48 and 60 VDC voltage.
- Backlit LCD screen.
- Logs last 128 days for performance review.
- Voltage step-down ability to allow for a higher PV array voltage.
- Five year warranty
Close
Midnite Classic 250MPPT
The Classic 250 MPPT Charge Controller has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 250 has a maximum output current of 63 amps, an operating voltage of 250 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 250 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.
- FEATURES:
- 250 operating voltage
- Max current out: 63 amps
- ETL listed to UL1741 and CSA
- Type 1 environmental rating
- Terminals are rated for 75 C
- Exclusive HyperVOC extends VOC limits
- 12-72V battery
- Built in DC-GFP and Arc Fault
- Detector
- Solar, wind and hydro MPPT modes
Close
Victron Energy SmartSolar MPPT 75/15
Why buy Victron from Canadian Solar Wholesale?
With the IPS company group, we buy directly from Victron Energy. Our warehouse is the only authorized Victron warranty and repair center in Western Canada.
Victron Energy SmartSolar MPPT 75/15
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Features and Specifications:
- Bluetooth Smart built-in: dongle not needed
- VE.Direct data connection
- Ultra-fast Maximum Power Point Tracking (MPPT)
- Internal temperature sensor
- Rated charge current: 10 Amps
- Max. PV short circuit current: 13 Amps
- Maximum PV open circuit voltage: 75 Volts
- Weight: 1.10 lbs (0,5 kg)
- Dimensions: 100 x 113 x 40 mm
- 5 year warranty