| Weight | 0.907185 kg |
|---|---|
| Dimensions | 6 × 6 × 7 cm |
Previous product
Back to products
Lightning Protector 300V
$ 161.66
Next product
Long Buss Bar
$ 24.77
Lightning Protector 600V
$ 161.66
The MidNite Solar Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection.
Protection for gridtie PV combiners and inverter input circuits.
Listed by ETL for US & Canada
Additional information
Related products
Close
Mini DC Breaker Box 175
Our mini DC breaker box is white powder coated aluminum Mini DC Breaker Box with 175A/125VDC breaker and 5 din rail breaker slots or 3 panel mount breaker slots.
Listed by ETL for US & Canada.
Close
Midnite MNPV6 Combiner
Midnite MNPV6 Combiner Enclosure. Gray aluminum type 3R rainproof enclosure with insulating dead front.
Includes 15 position PV negative bus bar, 14 position ground bus bar, 120 amp Plus bus bar for breakers and 80 amp bus bar for fuses.
For 150 VDC charge controllers & 600 VDC grid tie inverters, accepts six 150VDC breakers or 4 600VDC fuse holders.
Breakers/fuse holders sold separately.
5 year Warranty. Made in USA
Listed by ETL for US & Canada
Close
Midnite MNPV6 AC Disco
Midnite MNPV6 AC Disco
Midnite MNPV6 AC Disco enclosure is very versatile. It will work with 1-6 of our 150 volt DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect. You can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. Load Break rated. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick.
Depending upon the model number, you can use:
-
-
- Type 3R environmental rating
- DC 600V (1 circuit Pos or Pos and Neg switched) or DC 150v (6 Circuits) or AC 120v (6 circuits) use the Part no. MNPV6-Disco combiner
- DC 300V (3 circuits) Part #MNPV6-250-Disco combiner
- AC 240v 40 amps (3 circuits) Part #MNPV6-AC Micro-Disco combiner
- AC and DC can be installed in the same box!
Example: 600Vdc 20 amp PV in and 40 amp 240Vac Inverter output
-
Enclosure only
Breakers/fuse holders sold separately.
5 year Warranty. Made in USA
Listed by ETL for US & Canada
Close
200 Amp T Fuse
200 Amp T Fuse
Close
Midnite MNPV4HV-Disco 3R BSC
Midnite MNP4HV-Disco 3R BSC
The MNPV4HV-DISCO 3R-BSC’s red handle is lockable in the off position.
Type 3R aluminum enclosure (no rust, won’t turn to dust)
90 degrees Celcius terminals
See through dead front & color coded busbar guards included
Meets 2011 NEC
Load Break Rated
Model number MNPV4HV Disco 3R Basic
Warranty – 5 yrs.
Listed by ETL for US
Made in the USA
Enclosure only
Breakers/fuse holders sold separately.
Close
Quad Box
General use aluminum enclosure for 4 panel mount type breakers from 5 – 100 Amp.
Not recommended for use with cables larger than awg #4 (19mm).
Listed by ETL for US & Canada
Close
Lightning Protector 300V
The MidNite Solar Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection.
Protection for Classic and other charge controllers, off grid PV combiners and 120/240 VAC circuits.
Listed by ETL for US & Canada
Close
Midnite MNPV3 Combiner
MidNite MNPV3 Combiner Enclosure. Gray aluminum type 3R rainproof enclosure with insulating dead front.
For 150 VDC charge controllers & 600 VDC grid tie inverters, accepts 3 150VDC(MNEPV) breakers or 2 600VDC fuse holders.
Breakers/fuse holders sold separately.
5 year Warranty.
Made in USA.
Listed by ETL for US & Canada