| Weight | 1.81437 kg |
|---|---|
| Dimensions | 5 × 4 × 2 cm |
Main Battery Breaker 250
$ 155.68
Midnight’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.
125VDC 3/8″ studs 1.5″
AIC 50,000 at 125VDC
All MidNite circuit breakers hold 100% rated current independent of ambient temperature.
Listed for US & Canada
Additional information
Related products
Close
Lightning Protector 300V
The MidNite Solar Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection.
Protection for Classic and other charge controllers, off grid PV combiners and 120/240 VAC circuits.
Listed by ETL for US & Canada
Close
Midnite MNPV6 Disco
Midnite MNPV6 Disco
Midnite MNPV6 Disco enclosure is very versatile and come in AC and DC versions. It will work with 1-6 of our 150 volt DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect. You can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. Load Break rated. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick.
Depending upon the model number, you can use:
-
-
- Type 3R environmental rating
- DC 600V (1 circuit Pos or Pos and Neg switched) or DC 150v (6 Circuits) or AC 120v (6 circuits) use the Part no. MNPV6-Disco combiner
- DC 300V (3 circuits) Part #MNPV6-250-Disco combiner
- AC 240v 40 amps (3 circuits) Part #MNPV6-AC Micro-Disco combiner
- AC and DC can be installed in the same box!
Example: 600Vdc 20 amp PV in and 40 amp 240Vac Inverter output
-
Enclosure only
Breakers/fuse holders sold separately.
5 year Warranty. Made in USA
Listed by ETL for US & Canada
Close
300 Amp T Fuse
300 Amp T Fuse
Close
Mini DC Breaker Box 175
Our mini DC breaker box is white powder coated aluminum Mini DC Breaker Box with 175A/125VDC breaker and 5 din rail breaker slots or 3 panel mount breaker slots.
Listed by ETL for US & Canada.
Close
400 Amp T Fuse
400 Amp T Fuse
Close
Mini DC Breaker Box 250
Our mini dc breaker box is a white powder coated aluminum chassis Mini DC Breaker Box with 250A/125VDC breaker and 5 din rail breaker slots or 3 panel mount breaker slots.
Listed by ETL for US & Canada.
Close
Midnite MNPV8HV-Disco 3R
Midnite MNP8HV-Disco 3R
The MidNite Solar MNPV8HV Disco 3R can be re-configured in the field to be used with non-isolated inverters where both the positive and negative need to be disconnected. This also allows these to be used to combine and disconnect two arrays feeding two separate isolated inverters. This disconnecting and standard pre-wired combiner is plug and play, saving both time and money in the field. MidNite Solar’s Rapid Shutdown system, which includes MidNite’s disconnecting combiners, meet the requirement of the 2014 NEC 690.12 code.
Comes with 4 fuses and a single lightening arrestor
5 year Warranty. Made in USA
Listed by ETL for US & Canada
Convertible configuration (field configurable)
Eight strings combined for up to 160 Amps single 230 Amp/600V single pole disconnect)
4 + 4 positive strings, separate PV+ and PV- for use with 2 inverters (2 pole 115 Amp disconnect)
Four strings positive, four strings minus for use with non-isolated inverters (2 pole 115 Amp disconnect)
Disconnect has built in shunt trip with positive feedback.
Birdhouse compatible. Load Break Rated.
Optional PV connected power supply. Optional AC connected power supply for redundancy.
Type 3R aluminum enclosure (no rust, won’t turn to dust)
90o C connections. See thru deadfront & color coded busbar guards included.
Fuseholders (MNTS) installed. 15a/600v fuses installed. 600 volt max.
Close
Short Buss Bar
(MidNite Short Busbar) Shorter version of the insulated bus bars. These are useful for PV+ input on the narrow OB E-Panel and for a separate PV- bus bar for charge controllers that require them. Four #6 and two 1/0 wire slots.
Photo shows 3 Buss Bars