|Dimensions||25.4 x 17.8 x 17.8 cm|
MPPT ML2440 SRNE 40A Solar Charge Controller
40A MPPT ML2440 SRNE 40A Solar Charge Controller
- Nominal system voltage: 12/24 VDC Auto
- Battery charging setting: Sealed, Gel, Flooded and User
- Max. Solar input voltage: 100V
Max. PV input power : 550W (12V) / 1100W (24V)
◆ With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point.
◆ A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems, and raise the charging efficiency by up to 35% compared with the conventional PWM method.
◆ Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, etc.
◆ Automatic recognition of battery voltage is supported.
◆ LED fault indicators and an LCD screen which can display abnormality information.
◆ The controller is equipped with an LCD screen with which users can not only check device operating data and statuses.
◆ The controller supports standard Modbus protocol.
◆ The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat.
◆ Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery’s service life.
◆ TVS lighting protection
Warranty Information : 1-year warranty
Morningstar’s SunSaver™ is the world’s leading small solar controller for both professional and consumer applications including standard features and capabilities not found in any other small PV controller.
Rated 6 amps at 12 volts.
Five year warranty. Contact MorningStar for complete terms.
Tristar 45amp MPPT controller from Morningstar with TrakStar Technology is an advanced charge controller for off-grid Solar systems up to 3kW.
The TriStar MPPT maximizes energy harvest and provides excellent performance at sunrise and low solar insolation levels.
- Available in 45 or 60 amps at up to 150 volts open circuit,
- includes a remote temperature sensor
- Five year warranty
- Contact Morningstar for complete terms
Blue Sky Energy’s new Sun Charger 30 solar charge controller charges 12 volt batteries at up to 30 amps.
The Sun Charger 30 uses precise PWM charge voltage control combined with a sophisticated 3-stage charge algorithm to optimally charge flooded, GEL or AGM lead-acid chemistry batteries. To periodically condition flooded batteries the Sun Charger 30 will also perform a manual or automatic Equalization charge.
The built in low power LED digital display combines excellent readability with very low power consumption, includes an automatic night time diming feature and may be turned off completely if desired. The high accuracy display shows battery voltage, solar charge current, and computes total solar charge amp-hours produced.
To provide optimal charge control for various battery types all charge settings are user adjustable. The automatic or manual Equalization and solar charge amp-hour counter features are unique to the Sun Charger 30.
The Solar Boost Sun Charger 30 includes a 5 year warranty.
The Classic 250 MPPT Charge Controller has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 250 has a maximum output current of 63 amps, an operating voltage of 250 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 250 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.
- 250 operating voltage
- Max current out: 63 amps
- ETL listed to UL1741 and CSA
- Type 1 environmental rating
- Terminals are rated for 75 C
- Exclusive HyperVOC extends VOC limits
- 12-72V battery
- Built in DC-GFP and Arc Fault
- Solar, wind and hydro MPPT modes
Patented Maximum Power Point Tracking technology allows Solar Boost 3024iL to increase charge current up to 30% or more compared to conventional charge controllers. Don’t waste your money by throwing PV power away! Get the power you paid for with a Solar Boost 3024iL charge controller.
Solar Boost 3024iL’s advanced fully automatic 3-stage charge control system will properly charge flooded lead-acid, AGM and GEL batteries resulting in improved battery performance with less maintenance. The dual 30/40 amp rating will deliver up to 30 amps in 24 volt systems, or up to 40 amps in 12 volt systems. To further enhance versatility, a user configurable auxiliary output and Blue Sky Energy’s advanced IPN network interface are also included.
The user configurable auxiliary output can srve as either a 20 amp load controller, or as a 2 amp auxiliary battery charger. The load control feature can be used to limit excessive battery discharge in unattended remote systems, where as the auxiliary battery charge feature is ideal for charging a separate battery such as the engine battery in an RV.
Full 24 month manufacturers limited warranty. CSA approved.
Morningstar’s SunSaver Duo is an advanced PWM two battery controller for RV’s, caravans, boats and cottages. Rated for 25 amps at 12 volts DC, this product will charge two separate and isolated batteries at the same time, such as a “house” and an engine battery, based on user selectable priorities. This controller also includes a backlit remote meter which may be mounted in or on a wall, and displays digital and pictorial status information about the solar power system.
Five year warranty. Contact Morningstar for details.
SunLight 10 Controller by Morningstar
The SunLight 10 combines the SunSaver design with an advanced micro controller for automatic lighting control functions.
- rotary digital switch to select among 10 lighting options.
- A test button flashes red LED to confirm correct rotary switch selection.
- Rated 10 amps at 12 volts.
- Five year warranty.
Sunsaver 10L : a small solar controller for professional and consumer applications.
The SunSaver’s 100% solid state design features
- setpoint accuracy to 35 mV’s,
- low voltage disconnect,
- temperature compensation,
- sealed/flooded battery select,
- and true 0 to 100% pulse width modulation (PWM) duty cycle.
- Rated 10 amps at 12 volts.
- Five year warranty.