| Weight | 5 kg |
|---|---|
| Dimensions | 28.5 × 20.5 × 20.5 cm |
MPPT ML4860 SRNE 60 Amp Solar Charge Controller
$375.00
MPPT ML4860 SRNE 60 Amp Solar Charge Controller
- 150 Volt Max PV Input
- Screen Display
- Auto voltage range of 12V / 24V / 36V and 48V.
- Maximum Power Point Tracking
- Four stage charging mode
Max. photovoltaic system input power 800W/12V; 1600W/24V; 2400W/36V; 3200W/48V
◆ With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point.
◆ A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems, and raise the charging efficiency by up to 35% compared with the conventional PWM solar charge controllers
◆ Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, etc.
◆ Automatic recognition of battery voltage is supported.
◆ LED fault indicators and an LCD screen which can display abnormality information.
◆ The controller is equipped with an LCD screen with which users can not only check device operating data and statuses.
◆ The controller supports standard Modbus protocol.
◆ The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat.
◆ Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery’s service life.
◆ TVS lighting protection
Warranty Information : 1-year warranty
Additional information
Related products
Close
TriStar 45 amp Controller
Morningstar’s TriStar 45 amp Controller is a three-function controller that provides reliable solar battery charging, load control or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions.
Available in 45 or 60 amps at 12-48 volts, and has an optional meter, remote meter and remote temperature sensor.
Photo shown has the optional meter display installed on front of unit.
Five year warranty. Contact Morningstar for complete terms.
Close
Sun Charger 30
Blue Sky Energy’s new Sun Charger 30 solar charge controller charges 12 volt batteries at up to 30 amps.
The Sun Charger 30 uses precise PWM charge voltage control combined with a sophisticated 3-stage charge algorithm to optimally charge flooded, GEL or AGM lead-acid chemistry batteries. To periodically condition flooded batteries the Sun Charger 30 will also perform a manual or automatic Equalization charge.
The built in low power LED digital display combines excellent readability with very low power consumption, includes an automatic night time diming feature and may be turned off completely if desired. The high accuracy display shows battery voltage, solar charge current, and computes total solar charge amp-hours produced.
To provide optimal charge control for various battery types all charge settings are user adjustable. The automatic or manual Equalization and solar charge amp-hour counter features are unique to the Sun Charger 30.
The Solar Boost Sun Charger 30 includes a 5 year warranty.
SaleHot
Close
Outback FM 60 Mppt Controller
The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power. The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively, in ambient temperatures as high as 104°F (40°C).
Included in all of the FLEXmax Charge Controllers are the revolutionary features first developed by OutBack Power, including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button. The integrated OutBack network communications allows FLEXmax series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled complete system integration.
FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.
Features & Attributes
- Dimensions (LxWxH): 13.5 × 5.8 × 4 inches
- Weight: 11.7 lbs
- Designed to work with 12, 24, 36, 48 and 60 VDC voltage.
- Backlit LCD screen.
- Logs last 128 days for performance review.
- Voltage step-down ability to allow for a higher PV array voltage.
- Five year warranty
Close
Victron Energy SmartSolar 100/50 MPPT solar charge controller
Victron Energy 50A MPPT Solar Charge Controller
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
Features and Specifications:
- Bluetooth Smart built-in: dongle not needed
- VE.Direct data connection
- Ultra-fast Maximum Power Point Tracking (MPPT)
- Advanced Maximum Power Point Detection in case of partial shading conditions
- Outstanding conversion efficiency
- Flexible charge algorithm
- Extensive electronic protection
- Internal temperature sensor
- Real-time data display options
- Rated charge current: 50 Amps
- Max. PV short circuit current: 60 Amps
- Maximum PV open circuit voltage: 100 Volts
- Maximum wire size: #6 AWG
- Weight: 2.87 lbs (1.3 kg)
- Dimensions (inches / millimeters): 5.12″ x 7.32″ x 2.76″ / 130 x 186 x 70 mm
- 5 year warranty
SaleHot
Close
Outback FM 80 Mppt Controller
Outback FM80 MPPT Charge Controllers
FLEXmax MPPT Charge Controllers are a great solar charge controller when you require a high performance, efficient and versatile charge controller for your advanced power system.
Features & Attributes
- Easy to use and understand LCD display
- Rated to 80 A DC output current
- Fully adjustable control set points
- Allows use with virtually any battery type
- An optional Mate can be added to allow monitoring and control from up to 300 feet away
- Dimensions (LxWxH): 16.3 × 5.6 × 4 inches
- Weight: 14 lbs
- Five year warranty
Close
SunLight-10
SunLight 10 Controller by Morningstar
The SunLight 10 combines the SunSaver design with an advanced micro controller for automatic lighting control functions.
Features:
- rotary digital switch to select among 10 lighting options.
- A test button flashes red LED to confirm correct rotary switch selection.
- Rated 10 amps at 12 volts.
- Five year warranty.
Close
SunSaver-6
Morningstar’s SunSaver™ is the world’s leading small solar controller for both professional and consumer applications including standard features and capabilities not found in any other small PV controller.
Rated 6 amps at 12 volts.
Five year warranty. Contact MorningStar for complete terms.
Close
SunLight-20
SunLight 20 Controller by Morningstar
The SunLight 20 combines the SunSaver design with an advanced micro controller for automatic lighting control functions.
Features:
- rotary digital switch to select among 10 lighting options.
- A test button flashes red LED to confirm correct rotary switch selection.
- Rated 20 amps at 12 volts.
- Five year warranty.