| Weight | 4.1 kg |
|---|---|
| Dimensions | 25.4 × 17.8 × 17.8 cm |
Sale
MPPT SRNE SR-MC2450 12/24V-50A
$224.25 $201.25
SRNE SR-MC2450 12/24V-50A MPPT Solar Charge Controller
- Nominal system voltage: 12/24 VDC Auto
- Battery charging setting: Sealed, Gel, Flooded and User
- Max. Solar input voltage: 100V
Max. PV input power : 650W (12V) / 1300W (24V)
◆ With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point.
◆ A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems, and raise the charging efficiency by up to 35% compared with the conventional PWM method.
◆ Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, etc.
◆ Automatic recognition of battery voltage is supported.
◆ The controller has a remote LCD screen and Temperature Sensor
◆ The controller supports standard Modbus protocol.
◆ The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat.
◆ Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery’s service life.
◆ TVS lighting protection
Warranty Information : 1-year warranty
Additional information
Related products
Hot
Close
Victron Energy SmartSolar 100/30 MPPT solar charge controller
Victron Energy SmartSolar MPPT 100/30 solar charge controller SCC110030210. Remotely control and monitor your SmartSolar MPPT Charger with built-in bluetooth via VictronConnect
Built-In Bluetooth Smart: Monitor or update the controller via smartphones or other devices. (No longer requires a dongle)
Up to 440 watts at 12 volts, 880 watts at 24 volts
Ultra-fast Maximum Power Point Tracking (MPPT) and 98% peak efficiency
Sale
Close
Midnite Classic 250MPPT
The Classic 250 MPPT Charge Controller has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 250 has a maximum output current of 63 amps, an operating voltage of 250 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 250 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.
- FEATURES:
- 250 operating voltage
- Max current out: 63 amps
- ETL listed to UL1741 and CSA
- Type 1 environmental rating
- Terminals are rated for 75 C
- Exclusive HyperVOC extends VOC limits
- 12-72V battery
- Built in DC-GFP and Arc Fault
- Detector
- Solar, wind and hydro MPPT modes
SaleHot
Close
Outback FM 80 Mppt Controller
Outback FM80 MPPT Charge Controllers
FLEXmax MPPT Charge Controllers are a great solar charge controller when you require a high performance, efficient and versatile charge controller for your advanced power system.
Features & Attributes
- Easy to use and understand LCD display
- Rated to 80 A DC output current
- Fully adjustable control set points
- Allows use with virtually any battery type
- An optional Mate can be added to allow monitoring and control from up to 300 feet away
- Dimensions (LxWxH): 16.3 × 5.6 × 4 inches
- Weight: 14 lbs
- Five year warranty
Close
SunSaver-10L
Sunsaver 10L : a small solar controller for professional and consumer applications.
The SunSaver’s 100% solid state design features
- setpoint accuracy to 35 mV’s,
- low voltage disconnect,
- temperature compensation,
- sealed/flooded battery select,
- and true 0 to 100% pulse width modulation (PWM) duty cycle.
- Rated 10 amps at 12 volts.
- Five year warranty.
Close
SunSaver-20L
Sunsaver 20L : a small solar controller for professional and consumer applications.
The SunSaver features
- setpoint accuracy to 35 mV’s,
- low voltage disconnect,
- temperature compensation,
- sealed/flooded battery select,
- and true 0 to 100% pulse width modulation (PWM) duty cycle.
- Rated 20 amps at 12 volts.
- Five year warranty.
Close
SunSaver-6
Morningstar’s SunSaver™ is the world’s leading small solar controller for both professional and consumer applications including standard features and capabilities not found in any other small PV controller.
Rated 6 amps at 12 volts.
Five year warranty. Contact MorningStar for complete terms.
Close
SunLight-20
SunLight 20 Controller by Morningstar
The SunLight 20 combines the SunSaver design with an advanced micro controller for automatic lighting control functions.
Features:
- rotary digital switch to select among 10 lighting options.
- A test button flashes red LED to confirm correct rotary switch selection.
- Rated 20 amps at 12 volts.
- Five year warranty.
Close
SunLight-10
SunLight 10 Controller by Morningstar
The SunLight 10 combines the SunSaver design with an advanced micro controller for automatic lighting control functions.
Features:
- rotary digital switch to select among 10 lighting options.
- A test button flashes red LED to confirm correct rotary switch selection.
- Rated 10 amps at 12 volts.
- Five year warranty.