Showing 109–120 of 144 results

Show sidebar
Close

Long Buss Bar

$20.05

Four 1/0 & eleven #6 useable wire slots. Comes with two lengths of 10-32 screws. Both copper and aluminum wire is acceptable for use with these busbars.

Photo shows 3 Buss Bars.

Add to cart
Close

Lightning Protector 600V

$140.34

The MidNite Solar Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection.

Protection for gridtie PV combiners and inverter input circuits.

Listed by ETL for US & Canada

Add to cart
Close

Lightning Protector 300V

$140.34

The MidNite Solar Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection.

Protection for Classic and other charge controllers, off grid PV combiners and 120/240 VAC circuits.

Listed by ETL for US & Canada

Add to cart
iota dls-75
Close

Iota DLS27-40

$422.55

The DLS-27-40 Battery Charger/Power Converter from IOTA Engineering converts nominal 120V AC voltage to 27.2V D.C.

As a power supply, its tightly controlled regulation allows the user to operate any appropriate nominal DC load up to the converter’s rated output current.

As a battery charger, the DLS-27-40 will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time that minimizes undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the converter will float-charge the battery to prevent self-discharge of its cells.

Two year manufacturers warranty.

Add to cart
Sale
iota dls-75
Close

Iota DLS-75

$363.64 $345.00

The DLS-75 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging.

As a power supply, the unit’s tightly controlled regulation allows the user to operate a nominal 12VDC load up to 75 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-75 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.

Two year warranty.

Add to cart
iota dls-45
Close

Iota DLS-45

$229.98

The DLS-45 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging.

As a power supply, the unit’s tightly controlled regulation allows the user to operate a nominal 12VDC load up to 45 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-45 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.

Two year warranty.

Add to cart
iota dls-30
Close

Iota DLS-30

$200.49

The DLS-30 Power Converter/Battery Charger from IOTA Engineering converts nominal 120 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging.

As a power supply, the unit’s tightly controlled regulation allows the user to operate a nominal 12VDC load up to 30 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-30 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.

Two year warranty.

Add to cart
Close

Fuse Holder

$5.88

Touch Safe Fuse Holder for10x38 mm fuses 600VDC 30 amp Din rail mount. Use in the MNPV combiners for high voltage string inverters.

UL & CSA Listed

Add to cart
Close

Din Rail Breaker DC – 300

$40.10

Midnight’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. SPECIFY AMP SIZE required when ordering.

Available sizes: 7, 10, 12, 15, 20, 30, 50 amp 300VDC din rail mount breaker.

All MidNite circuit breakers hold 100% rated current independent of ambient temperature.

Listed by ETL for US & Canada

Add to cart
Sale
midnite solar classic
Close

Midnite Classic 200MPPT

$978.85 $958.85

The Classic MPPT Charge Controller substantially increases the flexibility, features and range currently found on MPPT controllers. The Classic is the first MPPT controller that has Arc Fault Protection, making this controller the safest available today.

FEATURES:

  • 200 operating voltage
  • Max current out: 79 amps
  • 12-72V battery charging standard with models up to 120V battery bank
  • Built in DC-GFP and Arc Fault Detector
  • Solar, wind and hydro MPPT modes
  • Set up Wizard
  • 32 megs of data logging

Listed by ETL for US & Canada CE Certified

Add to cart
Sale
midnite solar classic
Close

Midnite Classic 150MPPT

$956.48 $936.48

The Classic MPPT Charge Controller substantially increases the flexibility, features and range currently found on MPPT controllers. The Classic is the first MPPT controller that has Arc Fault Protection, making this controller the safest available today.

FEATURES:

  • 150 operating voltage
  • Max current out: 96 amps
  • 12-72V battery charging standard with models up to 120V battery bank
  • Built in DC-GFP and Arc Fault Detector
  • Solar, wind and hydro MPPT modes
  • Set up Wizard
  • 32 megs of data logging

Listed by ETL for US & Canada
CE Certified Listed

Add to cart
iota-iq-smart-controller
Close

Charger Module

$25.06

The IQ Smart Controller is compatible with any DLS Battery Charger model. The IQ Controller allows the DLS Charger to operate as an automatic 3-stage “smart charger.” This gives the customer the benefit of Bulk, Absorption, and Float stage charging, increasing the charging capacity of the DLS charger and decreasing charge times, insuring proper and safe battery charging and minimizing over-charging. This “smart” technology monitors the battery at all times. If the DLS voltage remains in the long term stage for more than seven days, the IQ will automatically deliver a boost charge for a predetermined time, then automatically return to the normal float stage.

In photo: Charger not included.

Add to cart