Showing 121–132 of 146 results

Show sidebar
Close

Din Rail Breaker DC – 300

$40.10

Midnight’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. SPECIFY AMP SIZE required when ordering.

Available sizes: 7, 10, 12, 15, 20, 30, 50 amp 300VDC din rail mount breaker.

All MidNite circuit breakers hold 100% rated current independent of ambient temperature.

Listed by ETL for US & Canada

Add to cart
Sale
midnite solar classic
Close

Midnite Classic 200MPPT

$978.85 $958.85

The Classic MPPT Charge Controller substantially increases the flexibility, features and range currently found on MPPT controllers. The Classic is the first MPPT controller that has Arc Fault Protection, making this controller the safest available today.

FEATURES:

  • 200 operating voltage
  • Max current out: 79 amps
  • 12-72V battery charging standard with models up to 120V battery bank
  • Built in DC-GFP and Arc Fault Detector
  • Solar, wind and hydro MPPT modes
  • Set up Wizard
  • 32 megs of data logging

Listed by ETL for US & Canada CE Certified

Add to cart
Sale
midnite solar classic
Close

Midnite Classic 150MPPT

$956.48 $936.48

The Classic MPPT Charge Controller substantially increases the flexibility, features and range currently found on MPPT controllers. The Classic is the first MPPT controller that has Arc Fault Protection, making this controller the safest available today.

FEATURES:

  • 150 operating voltage
  • Max current out: 96 amps
  • 12-72V battery charging standard with models up to 120V battery bank
  • Built in DC-GFP and Arc Fault Detector
  • Solar, wind and hydro MPPT modes
  • Set up Wizard
  • 32 megs of data logging

Listed by ETL for US & Canada
CE Certified Listed

Add to cart
iota-iq-smart-controller
Close

Charger Module

$25.06

The IQ Smart Controller is compatible with any DLS Battery Charger model. The IQ Controller allows the DLS Charger to operate as an automatic 3-stage “smart charger.” This gives the customer the benefit of Bulk, Absorption, and Float stage charging, increasing the charging capacity of the DLS charger and decreasing charge times, insuring proper and safe battery charging and minimizing over-charging. This “smart” technology monitors the battery at all times. If the DLS voltage remains in the long term stage for more than seven days, the IQ will automatically deliver a boost charge for a predetermined time, then automatically return to the normal float stage.

In photo: Charger not included.

Add to cart
PD52 240 VAC 50-Amp Automatic Transfer Switch
Close

50 amp Transfer Switch

$216.22

PD52 240 VAC 50-Amp Automatic Transfer Switch

Automatically senses generator power and prevents two power sources from entering the AC Distribution Panel at the same time.

240 VAC 50-Amp Switch, AC Connectors: Screw-type wiring Terminals.

Features:

  •  Time delay circuit board ensures generator voltage is at a stable level before transfer occurs.
  • Rugged, heavy duty, screw type wiring terminals ready to wire to contactor base, ensures ease of wiring and prevents wiring errors.
  • Easy to remove protective cover with wiring schematic inside.
  • Available in metal.
  • AC Detect option for auto generator start compatibility.
  • 70 Amp neutral rating.
  • 1 year limited manufacturers warranty.
Add to cart
Close

400 Amp T Fuse

$88.45

400 Amp T Fuse

Add to cart
30amp transfer switch
Close

30 amp Transfer Switch

$114.92

PD5110610 120 VAC 30-Amp Automatic Transfer Switch
120 VAC, 30 Amps, AC Connectors: screw terminals.

Automatically senses generator power and prevents two power sources from entering the AC Distribution Panel at the same time.

Features:

  • Quick change circuit board is easily replaced in the event of failure. No need to disconnect and reinstall the entire unit.
  • Time delay feature ensures generator voltage is at a stable level before transfer occurs.
  • Built-in strain reliefs allow the installer to simply push the branch circuit wires inside the unit for connection. Eliminates the need to purchase and install separate strain reliefs for each circuit.
  • Screw-type wiring terminals ensure ease of wiring and prevents wiring errors.
  • 1 year limited manufacturers warranty.
Add to cart
t fuse replacement
Close

200-400 Replacement T Fuse

$43.24

200 to 400 amp Replacement Fuse for the Deltec PFB T Fuse

Specify fuse amp when ordering. Available in 200, 300, 350 and 400 amps.

 

Add to cart
tristar temperature sensor
Close

TriStar Temp Sensor

$39.86

A Remote Temperature Sensor (RTS) for the TS45 or TS60 charge controller provides temperature compensated charging by measuring the temperature at the battery (10 meter cable). Use of the RTS is recommended whenever the temperature at the battery will be more than 5C (9F) different than the temperature at the controller. The TriStar charge controllers do not have on-board temperature compensation, therefore the use of the RTS is required for temperature compensated charging.

Five year warranty.

Add to cart
bluesky ipn pro remote
Close

IPN Pro Remote without Shunt

$242.52

The IPN-ProRemote from Blue Sky Energy combines full-featured charge controller monitoring and battery system monitoring into a single user friendly remote display. A bright crisp back-lit LCD display with plain English language text and three simple front panel keys is extremely easy to use.

With the IPN-ProRemote you no longer have to guess how much battery capacity remains. A high accuracy calculation of remaining battery capacity compensates for a variety of factors including charge/discharge current, battery size, type, temperature and how the battery was brought back to full charge. It even learns from past battery behavior to continuously improve accuracy!

Two year limited warranty.

The IPNPRO spec sheet can be found under “Manuals” on our site.

Add to cart
Blue Sky IPN Pro Remote
Close

Blue Sky IPN Pro Remote with Shunt

$298.57

The Blue Sky IPN Pro Remote combines full-featured charge controller monitoring and battery system monitoring into a single user friendly remote display. A bright crisp back-lit LCD display with plain English language text and three simple front panel keys is extremely easy to use.

With the IPN-ProRemote you no longer have to guess how much battery capacity remains. A high accuracy calculation of remaining battery capacity compensates for a variety of factors including charge/discharge current, battery size, type, temperature and how the battery was brought back to full charge. It even learns from past battery behavior to continuously improve accuracy!

The IPN-ProRemote with Shunt includes a 500A/50Mv shunt, a wire-mold box & 30 ft of wire.

Two year limited warranty.

The IPNPRO-S spec sheet can be found under “Manuals” on our site.

Add to cart
Close

Blue Sky Remote Temp Sensor

$35.44

Applying the proper charge voltage is critical for achieving optimum battery performance and longevity. The ideal charge voltage required by batteries changes with battery temperature. 

The battery temperature sensor allows the charge controller to continuously adjust charge voltage based on actual battery temperature.

Temperature compensation of charge voltage assures that the battery receives the proper charge voltage as battery temperature changes during normal operation.

A Blue Sky Energy Remote Temperature Sensor is recommended for use with all Blue Sky Charge Controllers.

Add to cart