| Weight | 35.3 kg |
|---|---|
| Dimensions | 25.4 × 46.5 × 74.85 cm |
Hot
Sol-Ark 8K All-in-One Inverter System
$9,936.33
Sol-Ark 8K All-In-One Inverter System
INDOOR/OUTDOOR EASY INSTALL
- Sol-Ark 8K’s All-In-One design is twice as fast to install.
- Two MPPT Charge Controllers,
- 8kW continuous / 16kW peak inverter
- Built in remote monitoring
Works With or Without Batteries
AC/ DC COUPLING | DC TRANSFORMLESS
- 11kW DC Coupling (150V-425V @ 20A per MPPT)
- Boosts PV energy 10-20% without increasing PV array size
- Reduces storage inverter costs up to 30%
FLEET MANAGEMENT
- Remote access monitoring and system adjustments
WARRANTY & RELIABILITY
- 10 year warranty with live support 7 days a week
The all-in-one solar generator system, with its color-touch display, can be used off-grid or on-grid.
Sol-Ark 8k All-in-One Spec. Sheet
Sol-Ark 8k All-in-One Brochure
Additional information
Related products
Hot
Close
Sol-Ark 12K All-in-One Inverter System
Sol-Ark All-In-One Battery System
INDOOR/OUTDOOR EASY INSTALL
- Sol-Ark 12K’s All-In-One design is twice as fast to install.
- Two MPPT Charge Controllers,
- 9kW continuous / 20kW peak inverter,
- Built in remote monitoring
Works With or Without Batteries
AC/ DC COUPLING | DC TRANSFORMLESS
- supports simultaneous DC and AC coupling up to a combined 13kW of PV.
- Boosts PV energy 10-20% without increasing PV array size
- Reduces storage inverter costs up to 30%
FLEET MANAGEMENT
- Remote access monitoring and system adjustments
WARRANTY & RELIABILITY
- 10 year warranty with live support 7 days a week
The all-in-one solar generator system, with its color-touch display, can be used off-grid or on-grid. This revolutionary solar hybrid inverter is stackable up to 72 kW, and at 20kW peak power, it becomes truly limitless!
Sol-Ark 12k All-in-One Spec. Sheet.
Close
Magnum Energy Auto Gen Start – Standalone
Auto Generator Start – Stand Alone
ME-AGS-S
The ME-AGS-S Auto Generator Start Controller (AGS Controller – Standalone Version) – The ME-AGS-S is the ‘standalone’ version of Magnum Energy’s Automatic Generator Start (AGS) controllers. This auto generator start controller can automatically start your generator based on battery voltage or high temperature.
Adjustable settings include: run time, start volts DC, start temp, quiet time, and 24 hour clock. Works with ME Series, MM Series, MMS Series, MS Series, MS-PAE Series and RD Series. ME-AGS-S kit includes: AGS module, Remote on/off/test switch, switch bezel, a 25′ 6-wire cable, and has basic adjustments starting on battery voltage or temperature.
*The ME-AGS-S does not require an inverter / charger.
Imagine being able to enjoy a day away all-the-while knowing your living space will stay cool and comfortable and your batteries will stay charged and ready for all of the activities that make up daily life. There’s nothing better than returning to a nice, cool, comfortable home with charged batteries after a day away. The Magnum Auto Gen Start (AGS) can make this happen.
The Magnum AGS is compatible with most major generators, including Onan, Powertech, Generac, Westerbeke, Kohler, EPS, Northern Lights, and most portable generators with electric start.
Hot
Close
Magnum Inverter ME3112
The Magnum inverter ME3112 is a 3000 watt 12 volt Modified Sine Wave Inverter/Charger from Magnum Energy.
The ME Series of Inverter/Chargers are designed specifically for rugged recreational vehicle use. The ME series is powerful, easy-to-use, and best of all, cost effective. The ME3112 spec sheet can be found under “Manuals” on our site.
Two year manufacturers warranty.
We offer free shipping on all Magnum Energy Inverters in Canada.
Close
Magnum Energy Battery Monitor Kit
The Battery Monitor Kit from Magnum Energy gives you a “fuel gauge” type of meter for your battery bank. It monitors the battery bank and reports the percentage state of charge, real time amps, voltage, amp-hours in/out, and the minimum/maximum DC volts.
The Battery Monitor Kit includes the sense module, sense and communication cables, and a 500 amp shunt.
The ME-BMK requires a Magnum Inverter with a “Network” port and a ME-RC50 remote with revision 2.0 or higher.
The ME-BMK info sheet can be found under “Manuals” on our site.
Interested in Magnum Energy Inverters? Click here: Magnum Energy Inverters
Hot
Close
Victron Energy VE Panel 3kVA 120-240 NA Primary 12-24Vdc
Victron Energy VE Panel 3kVA 120-240 NA Primary 12-24Vdc
Why buy Victron from Canadian Solar Wholesale?
With the IPS company group, we buy directly from Victron Energy. Our warehouse is the only authorized Victron warranty and repair center in Western Canada.
Key Features
Includes:
• Internally pre-wired enclosure.
• A built-in AC bypass switch with full system current capability, and a DC disconnect breaker for safe and easy isolation for
servicing of the inverter and/or battery bank.
• Battery to inverter/charger DC disconnect breaker (250 Amps).
• Inverter AC input overcurrent protection breakers.
• DIN mount AC and DC breakers for quick and easy operation.
• A500A/50mV DC shunt installed for easy connection to battery status monitor.
• Enclosure and components are UL/CSA certified and designated for indoor use.
• Configurations available for both single 120 and 230 VAC, 120/240 VAC and 3-Phase systems.
• DC negative, positive and ground busbars for DC loads and PV arrays included.
• Mounting provided for DIN rail DC load/disconnect breakers.
• Integrates directly with Victron Energy’s 3,000 and 5,000 MultiPlus and Quattro inverter/chargers.
• Knockouts for inverter/charger and battery cables, PV in/out, DC panel mount breakers.
VE Panel Installation and Service Manual
Hot
Close
Magnum Energy Remote Control ME-RC50
The ME-RC50 is simple to use, yet allows full set-up of all the adjustable parameters available in the ME, MM, MMS, MS, and RD Series inverters. The remote offers multiple functions in one place, including: inverter on/off, charger on/off, shore power breaker settings, AGS control, meter button, setup, and technical menus. The ME-RC50 also has the option of controlling the ME-BMK Battery Monitor Kit using a network connection to the inverter. This remote has convenient finger-tip operation, including the new one-knob programming.
The ME-RC50 info sheet can be found under “Manuals” on our site.
SaleHot
Close
Victron Energy Quattro 48/5000/70-100/100 120V VE.Bus
Why buy Victron from Canadian Solar Wholesale?
With the IPS company group, we buy directly from Victron Energy. Our warehouse is the only authorized Victron warranty and repair center in Western Canada.
Victron Energy QUA485021100 Quattro 48/5000/70-100/100 120V VE.Bus
- PowerControl / PowerAssist Yes
- Integrated Transfer switch Yes
- AC inputs (2x) Input voltage range: 90-140 VAC Input frequency: 45 – 65 Hz Power factor: 1
- Maximum feed through current 2x 100 A
INVERTER
- Input voltage range 38 – 66 V
- Output (1): Output voltage: 120 VAC ± 2% and Frequency: 60 Hz ± 0,1%
- Cont. output power at 25°C (3) 5000 VA
- Cont. output power at 25°C 4000 W
- Cont. output power at 40°C 3700 W
- Cont. output power at 65°C 3000 W
- Peak power 10000 W
- Maximum efficiency 95 %
- Zero load power 35 W
- Zero load power in AES mode 30 W
- Zero load power in Search mode 15 W
CHARGER
- Charge voltage ‘absorption’ (V DC) 57,6 V
- Charge voltage ‘float’ (V DC) 55,2 V
- Storage mode (V DC) 52,8 V
- Charge current house battery (A) (4) 70 A
- Charge current starter battery (A) 4 A (12V and 24V models only)
- Battery temperature sensor Yes
GENERAL
- Auxiliary output (5) 50 A
- Programmable relay (6) 3x
- Protection (2) a-g
- VE.Bus communication port for parallel, split phase and three phase operation, remote monitoring and system integration
- General purpose com. port 2x
- Remote on-off Yes
- Common Characteristics operating temp.: -40 to +65˚C, Humidity (non-condensing): max. 95%
ENCLOSURE
- Common Characteristics: Material & Colour aluminium (blue RAL 5012) Protection category: IP 21
- Battery-connection four M8 bolts (2 plus and 2 minus connections)
- 230 V AC-connection Bolts M6
- Weight (kg): 66 lb, 30 kg
- Dimensions (hxwxd) : 17,5 x 13,0 x 9,6 inch, 444 x 328 x 240 mm
STANDARDS
- Safety EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1
- Emission, Immunity EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
- Road vehicles 12V and 24V models: ECE R10-5
Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC sources, for example, the public grid and a generator, or two generators. The Quattro will automatically connect to the active source.
Two AC Outputs
The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is life only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a water heater, for example, can be connected to this output.
Virtually unlimited power thanks to parallel operation
Up to 6 Quattro units can operate in parallel. Six units 48/10000/140, for example, will provide 48kW / 60kVA output power and 840 Amps charging capacity.
Three phase capability
Three units can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected to provide 144kW / 180kVA inverter power and more than 2500A charging capacity.
PowerControl – Dealing with limited generator, shoreside or grid power
The Quattro is a very powerful battery charger. It will, therefore, draw a lot of current from the generator or shore side supply (16A per 5kVA Quattro at 230VAC). A current limit can be set on each AC input. The Quattro will then take account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from being overloaded.
PowerAssist – Boosting shore or generator power
This feature takes the principle of PowerControl to a further dimension allowing the Quattro to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the Quattro will make sure that insufficient mains or generator power are immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Solar energy: AC power available even during a grid failure
The Quattro can be used in off grid as well as grid-connected PV and other alternative energy systems. Loss of mains detection software is available.
System configuring
- In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes
with a DIP switch setting procedure. - Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System
Configurator software. - Off-grid, grid interactive, and self-consumption applications, involving grid-tie inverters and/or MPPT Solar
Chargers can be configured with Assistants (dedicated software for specific applications).
On-site Monitoring and control
Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).
Remote Monitoring and control
Color Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.
Remote configuring
When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely.
Hot
Close
Kisae IC121040 Inverter/Charger Power Panel with Outback FM60
The Kisae IC121040 Inverter/Charger Power Panel Includes the following:
- Kisae IC121040 1000 Watt Sinewave with 40A Battery Charger
- OUTBACK FM 60 60 Amp Mppt controller
- Magnum Energy BP-MMP Back Plate MMP fits Mini Panel
- Midnite MNDC250 Mini DC Breaker box 175/250
- 2/0 Gauge Inverter Cable DLO Per Foot
- Cable ends with heat shrink cover CSA approved
- Flexible battery cable conduit with 1 connector 3.5 feet
- Midnite Din Rail Breaker DC type 150 volts
- Trimetric TM-2030-A 12/24/48 with 500 amp shunt
- wiremold box and 30 feet of wire
Interested in Magnum Energy Power Panels? Click here: Magnum Energy Power Panels