Weight | 4.53592 kg |
---|---|
Dimensions | 20 × 9 × 6 cm |
TriStar 45 amp Controller
$262.55
Morningstar’s TriStar 45 amp Controller is a three-function controller that provides reliable solar battery charging, load control or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions.
Available in 45 or 60 amps at 12-48 volts, and has an optional meter, remote meter and remote temperature sensor.
Photo shown has the optional meter display installed on front of unit.
Five year warranty. Contact Morningstar for complete terms.
Related products

Victron Energy SmartSolar MPPT 250/100-MC4 Solar Charge Controller
SmartSolar charge controller
The Victron Energy SmartSolar MPPT 250/100-MC4 Solar Charge Controller gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by Bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
By adding the SmartSolar Control Display you will be able to check the status of your Charger and battery-storage at a glance. Simply plug it into the face of your MPPT charger to provide you with real-time monitoring and set-up capabilities.
Features and Specifications:
– Ultra-fast Maximum Power Point Tracking (MPPT)
– Advanced Maximum Power Point Detection in case of partial shading conditions
– Outstanding conversion efficiency
– Flexible charge algorithm
– Internal temperature sensor
– Bluetooth Smart built-in: dongle not needed
– Programmable relay
– Optional: pluggable LCD display
– 5 year warranty

Victron Energy SmartSolar 100/50 MPPT solar charge controller
Victron Energy 50A MPPT Solar Charge Controller
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
Features and Specifications:
- Bluetooth Smart built-in: dongle not needed
- VE.Direct data connection
- Ultra-fast Maximum Power Point Tracking (MPPT)
- Advanced Maximum Power Point Detection in case of partial shading conditions
- Outstanding conversion efficiency
- Flexible charge algorithm
- Extensive electronic protection
- Internal temperature sensor
- Real-time data display options
- Rated charge current: 50 Amps
- Max. PV short circuit current: 60 Amps
- Maximum PV open circuit voltage: 100 Volts
- Maximum wire size: #6 AWG
- Weight: 2.87 lbs (1.3 kg)
- Dimensions (inches / millimeters): 5.12″ x 7.32″ x 2.76″ / 130 x 186 x 70 mm
- 5 year warranty
Midnite Classic 250MPPT
The Classic 250 MPPT Charge Controller has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 250 has a maximum output current of 63 amps, an operating voltage of 250 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 250 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.
- FEATURES:
- 250 operating voltage
- Max current out: 63 amps
- ETL listed to UL1741 and CSA
- Type 1 environmental rating
- Terminals are rated for 75 C
- Exclusive HyperVOC extends VOC limits
- 12-72V battery
- Built in DC-GFP and Arc Fault
- Detector
- Solar, wind and hydro MPPT modes

MPPT SRNE SR-MC2450 12/24V-50A
SRNE SR-MC2450 12/24V-50A MPPT Solar Charge Controller
- Nominal system voltage: 12/24 VDC Auto
- Battery charging setting: Sealed, Gel, Flooded and User
- Max. Solar input voltage: 100V
Max. PV input power : 650W (12V) / 1300W (24V)
◆ With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point.
◆ A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems, and raise the charging efficiency by up to 35% compared with the conventional PWM method.
◆ Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, etc.
◆ Automatic recognition of battery voltage is supported.
◆ The controller has a remote LCD screen and Temperature Sensor
◆ The controller supports standard Modbus protocol.
◆ The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat.
◆ Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery’s service life.
◆ TVS lighting protection
Warranty Information : 1-year warranty
SunSaver-6
Morningstar’s SunSaver™ is the world’s leading small solar controller for both professional and consumer applications including standard features and capabilities not found in any other small PV controller.
Rated 6 amps at 12 volts.
Five year warranty. Contact MorningStar for complete terms.

Victron Energy SmartSolar MPPT 150/100-Tr Solar Charge Controller
SmartSolar charge controller
The Victron Energy SmartSolar MPPT 150/100-Tr Solar Charge Controller gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by Bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
By adding the SmartSolar Control Display you will be able to check the status of your Charger and battery-storage at a glance. Simply plug it into the face of your MPPT charger to provide you with real-time monitoring and set-up capabilities.
Features and Specifications:
– Ultra-fast Maximum Power Point Tracking (MPPT)
– Advanced Maximum Power Point Detection in case of partial shading conditions
– Outstanding conversion efficiency
– Flexible charge algorithm
– Internal temperature sensor
– Bluetooth Smart built-in: dongle not needed
– Programmable relay
– Optional: pluggable LCD display
– 5 year warranty
SunLight20
SunLight 20 Controller by Morningstar
The SunLight 20 combines the SunSaver design with an advanced micro controller for automatic lighting control functions.
Features:
- rotary digital switch to select among 10 lighting options.
- A test button flashes red LED to confirm correct rotary switch selection.
- Rated 20 amps at 12 volts.
- Five year warranty.
SunLight-10
SunLight 10 Controller by Morningstar
The SunLight 10 combines the SunSaver design with an advanced micro controller for automatic lighting control functions.
Features:
- rotary digital switch to select among 10 lighting options.
- A test button flashes red LED to confirm correct rotary switch selection.
- Rated 10 amps at 12 volts.
- Five year warranty.