|Dimensions||9 × 20.5 × 13 cm|
Victron Energy SmartSolar 100/30 MPPT solar charge controller
Victron Energy SmartSolar MPPT 100/30 solar charge controller SCC110030210. Remotely control and monitor your SmartSolar MPPT Charger with built-in bluetooth via VictronConnect
Built-In Bluetooth Smart: Monitor or update the controller via smartphones or other devices. (No longer requires a dongle)
Up to 440 watts at 12 volts, 880 watts at 24 volts
Ultra-fast Maximum Power Point Tracking (MPPT) and 98% peak efficiency
Victron Energy Smart Battery Monitor
With Bluetooth built-in, the BMV-712 Smart can connect to your smart phone for programming and monitoring.
Features and Specifications:
- Bluetooth inside
- Download the Victron Bluetooth app for smart phones
- Easy to install
- Midpoint voltage monitoring
- Very low current draw from the battery
- Bi-stable alarm relay
- Supply voltage: 6.5 to 70 Volts DC
- Battery capacity: 20 to 9,999 Amp-hours (Ah)
- 500A / 50mV shunt included
- 10 meter cable included
- 5 year warranty
SunLight 20 Controller by Morningstar
The SunLight 20 combines the SunSaver design with an advanced micro controller for automatic lighting control functions.
- rotary digital switch to select among 10 lighting options.
- A test button flashes red LED to confirm correct rotary switch selection.
- Rated 20 amps at 12 volts.
- Five year warranty.
The Victron Energy MultiPlus Compact 24/2000/50-50 120V VE.Bus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 5000VA per module.
Unique PowerAssist feature
The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
Uninterrupted AC power (UPS function)
In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.
The Classic MPPT Charge Controller substantially increases the flexibility, features and range currently found on MPPT controllers. The Classic is the first MPPT controller that has Arc Fault Protection, making this controller the safest available today.
- 150 operating voltage
- Max current out: 96 amps
- 12-72V battery charging standard with models up to 120V battery bank
- Built in DC-GFP and Arc Fault Detector
- Solar, wind and hydro MPPT modes
- Set up Wizard
- 32 megs of data logging
Listed by ETL for US & Canada
CE Certified Listed
Victron Energy system monitoring
The Victron Energy Venus GX is the communication-center of your installation. Venus allows you to talk to all components in your system and ensure they are working in harmony. Monitoring of live data, and changing settings is performed by using your smartphone (or other device) via their free-to-use Victron Remote Management Portal (VRM).
This device provides intuitive control and monitoring. It has the same functionality as the Color Control GX, with a few extras:
– lower cost, mainly because it has no display or buttons
– 3 tank sender inputs
– 2 temperature inputs
40A MPPT ML2440 SRNE 40A Solar Charge Controller
- Nominal system voltage: 12/24 VDC Auto
- Battery charging setting: Sealed, Gel, Flooded and User
- Max. Solar input voltage: 100V
Max. PV input power : 550W (12V) / 1100W (24V)
◆ With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point.
◆ A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems, and raise the charging efficiency by up to 35% compared with the conventional PWM method.
◆ Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, etc.
◆ Automatic recognition of battery voltage is supported.
◆ LED fault indicators and an LCD screen which can display abnormality information.
◆ The controller is equipped with an LCD screen with which users can not only check device operating data and statuses.
◆ The controller supports standard Modbus protocol.
◆ The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat.
◆ Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery’s service life.
◆ TVS lighting protection
Warranty Information : 1-year warranty
Tristar 45amp MPPT controller from Morningstar with TrakStar Technology is an advanced charge controller for off-grid Solar systems up to 3kW.
The TriStar MPPT maximizes energy harvest and provides excellent performance at sunrise and low solar insolation levels.
- Available in 45 or 60 amps at up to 150 volts open circuit,
- includes a remote temperature sensor
- Five year warranty
- Contact Morningstar for complete terms
Outback FM80 MPPT Charge Controllers
FLEXmax MPPT Charge Controllers are a great solar charge controller when you require a high performance, efficient and versatile charge controller for your advanced power system.
Features & Attributes
- Easy to use and understand LCD display
- Rated to 80 A DC output current
- Fully adjustable control set points
- Allows use with virtually any battery type
- An optional Mate can be added to allow monitoring and control from up to 300 feet away
- Dimensions (LxWxH): 16.3 × 5.6 × 4 inches
- Weight: 14 lbs
- Five year warranty