Weight | 1.4 kg |
---|---|
Dimensions | 9 × 20.5 × 13 cm |
Victron Energy SmartSolar 150/85 TR VE Can MPPT solar charge controller
$945.00 $920.00
Victron Energy 150/85 TR VE CAN MPPT Solar Charge Controller
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
Features and Specifications:
- Bluetooth Smart built-in: dongle not needed
- VE.Direct data connection
- Ultra-fast Maximum Power Point Tracking (MPPT)
- Advanced Maximum Power Point Detection in case of partial shading conditions
- Outstanding conversion efficiency
- Flexible charge algorithm
- Extensive electronic protection
- Internal temperature sensor
- Real-time data display options
- Rated charge current: 85 Amps
- Maximum PV open circuit voltage: 150 Volts
- 5 year warranty
Related products
SunSaver-10L
The SunSaver's 100% solid state design features
- setpoint accuracy to 35 mV's,
- low voltage disconnect,
- temperature compensation,
- sealed/flooded battery select,
- and true 0 to 100% pulse width modulation (PWM) duty cycle.
- Rated 10 amps at 12 volts.
- Five year warranty.
Victron CerboGX RV Solar Kit
Victron CerboGX RV Solar Kit
Remotely control and monitor Victron Energy RV Solar kits with the new CerboGX and Cerbo GX Touch 50 display with built-in bluetooth and Wifi . The system is a complete all in one solar kit designed to mount on the floor or wall and can fit under a bench or bed in an RV or van.Victron CerboGX RV Solar Kit System Details:
1 | SmartSolar MPPT 100/50 Solar Charge Controller |
1 | Victron Energy MultiPlus 12/3000 (Available in 2000W Multiplus Compact) |
1 | Victron SmartShunt |
1 | Victron Cerbo GX - Built in Wifi & Bluetooth |
2 | VE.Direct Cables to connect smartsolar and smartshunt to cerboGX |
1 | WireBox-M Tr (for Tr models, h=6.9 inch) For Charge controller |
1 | Victron GX Touch 50 - display screen for Cerbo GX |
1 | RJ45 UTP Cable 10m VE Bus cable to connect inverter to CerboGX |
1 | MK3-USB (to program inverter with laptop and to adjust inverter charging parameters in the future) |
4 | Z bracket kits ( 2 kits, 8 bracket per panel ) |
2 | Canadian Solar 335W panels |
1 | Y adapter Kit to Parallel Solar Panels |
1 | 4/0 Inverter Cable Kit  12/24V |
1 | MC4 RV cable kit 25 ft Red and 25 ft Black with 2 ends |
1 | Bluetooth SmartSense Temp Sensor (for charge controller temp compensation charging) |
1 | Victron TR Smart DC to DC charger 12/12 30A 360W |
1 | Midnite MNDC250 Mini DC |
1 | Midnite Breaker protector |
5 | Midnite Din Rail Breakers for PV input & output and DC loads |
1 | System is prewiring, programmed and tested |
|
MPPT ML4860 SRNE 60 Amp Solar Charge Controller
MPPT ML4860 SRNE 60 Amp Solar Charge Controller
- 150 Volt Max PV Input
- Screen Display
- Auto voltage range of 12V / 24V / 36V and 48V.
- Maximum Power Point Tracking
- Four stage charging mode
Max. photovoltaic system input power 800W/12V; 1600W/24V; 2400W/36V; 3200W/48V
â—† With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point. â—† A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems, and raise the charging efficiency by up to 35% compared with the conventional PWM solar charge controllers â—† Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, etc. â—† Automatic recognition of battery voltage is supported. â—† LED fault indicators and an LCD screen which can display abnormality information. â—† The controller is equipped with an LCD screen with which users can not only check device operating data and statuses. â—† The controller supports standard Modbus protocol. â—† The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat. â—† Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery's service life. â—† TVS lighting protection Warranty Information :Â 1-year warrantyMidnite Classic 150MPPT
- 150 operating voltage
- Max current out: 96 amps
- 12-72V battery charging standard with models up to 120V battery bank
- Built in DC-GFP and Arc Fault Detector
- Solar, wind and hydro MPPT modes
- Set up Wizard
- 32 megs of data logging
SunSaver-6
TriStar 60 amp MPPT Controller
SunLight-10
- rotary digital switch to select among 10 lighting options.
- A test button flashes red LED to confirm correct rotary switch selection.
- Rated 10 amps at 12 volts.
- Five year warranty.
SunLight20
- rotary digital switch to select among 10 lighting options.
- A test button flashes red LED to confirm correct rotary switch selection.
- Rated 20 amps at 12 volts.
- Five year warranty.