|Dimensions||16 × 33 × 29 cm|
Victron Energy SmartSolar MPPT 150/100-Tr Solar Charge Controller
SmartSolar charge controller
The Victron Energy SmartSolar MPPT 150/100-Tr Solar Charge Controller gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by Bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
By adding the SmartSolar Control Display you will be able to check the status of your Charger and battery-storage at a glance. Simply plug it into the face of your MPPT charger to provide you with real-time monitoring and set-up capabilities.
Features and Specifications:
– Ultra-fast Maximum Power Point Tracking (MPPT)
– Advanced Maximum Power Point Detection in case of partial shading conditions
– Outstanding conversion efficiency
– Flexible charge algorithm
– Internal temperature sensor
– Bluetooth Smart built-in: dongle not needed
– Programmable relay
– Optional: pluggable LCD display
– 5 year warranty
Morningstar’s SunSaver™ is the world’s leading small solar controller for both professional and consumer applications including standard features and capabilities not found in any other small PV controller.
Rated 6 amps at 12 volts.
Five year warranty. Contact MorningStar for complete terms.
The Classic 250 MPPT Charge Controller has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 250 has a maximum output current of 63 amps, an operating voltage of 250 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 250 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.
- 250 operating voltage
- Max current out: 63 amps
- ETL listed to UL1741 and CSA
- Type 1 environmental rating
- Terminals are rated for 75 C
- Exclusive HyperVOC extends VOC limits
- 12-72V battery
- Built in DC-GFP and Arc Fault
- Solar, wind and hydro MPPT modes
Victron Energy Smart Battery Monitor
With Bluetooth built-in, the BMV-712 Smart can connect to your smart phone for programming and monitoring.
Features and Specifications:
- Bluetooth inside
- Download the Victron Bluetooth app for smart phones
- Easy to install
- Midpoint voltage monitoring
- Very low current draw from the battery
- Bi-stable alarm relay
- Supply voltage: 6.5 to 70 Volts DC
- Battery capacity: 20 to 9,999 Amp-hours (Ah)
- 500A / 50mV shunt included
- 10 meter cable included
- 5 year warranty
MPPT ML4860 SRNE 60 Amp Solar Charge Controller
- 150 Volt Max PV Input
- Screen Display
- Auto voltage range of 12V / 24V / 36V and 48V.
- Maximum Power Point Tracking
- Four stage charging mode
Max. photovoltaic system input power 800W/12V; 1600W/24V; 2400W/36V; 3200W/48V
◆ With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails resulting in multiple peaks on the I-V curve, the controller is still able to accurately track the maximum power point.
◆ A built-in maximum power point tracking algorithm can significantly improve the energy utilization efficiency of photovoltaic systems, and raise the charging efficiency by up to 35% compared with the conventional PWM solar charge controllers
◆ Charging program options are available for different types of batteries including gel batteries, sealed batteries, open batteries, etc.
◆ Automatic recognition of battery voltage is supported.
◆ LED fault indicators and an LCD screen which can display abnormality information.
◆ The controller is equipped with an LCD screen with which users can not only check device operating data and statuses.
◆ The controller supports standard Modbus protocol.
◆ The controller employs a built-in over-temperature protection mechanism. When temperature surpasses the set value, the charging current will decline in linear proportion to the temperature so as to curb the temperature rise of the controller, effectively keeping the controller from being damaged by overheat.
◆ Featuring a temperature compensation function, the controller can automatically adjust charging and discharging parameters in order to extend the battery’s service life.
◆ TVS lighting protection
Warranty Information : 1-year warranty
Morningstar’s TriStar 45 amp Controller is a three-function controller that provides reliable solar battery charging, load control or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions.
Available in 45 or 60 amps at 12-48 volts, and has an optional meter, remote meter and remote temperature sensor.
Photo shown has the optional meter display installed on front of unit.
Five year warranty. Contact Morningstar for complete terms.
The Classic MPPT Charge Controller substantially increases the flexibility, features and range currently found on MPPT controllers. The Classic is the first MPPT controller that has Arc Fault Protection, making this controller the safest available today.
- 150 operating voltage
- Max current out: 96 amps
- 12-72V battery charging standard with models up to 120V battery bank
- Built in DC-GFP and Arc Fault Detector
- Solar, wind and hydro MPPT modes
- Set up Wizard
- 32 megs of data logging
Listed by ETL for US & Canada
CE Certified Listed
The Victron Energy MultiPlus Compact 12/2000/80-50 120V VE.Bus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Models range from 800VA to 5000VA per module.
Unique PowerAssist feature
The MultiPlus will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
Uninterrupted AC power (UPS function)
In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.
The Color Control GX (CCGX) provides intuitive control and monitoring for all products connected to it. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT 150/70, BMV-700 series, Skylla-i, Lynx Ion and even more.
Victron Energy system monitoring
The Color Control GX is the communication-centre of your installation. It offers at-a-glance live information, and lets you control all products connected to it. Full system control is gained – almost anywhere in the world – by accessing your Color Control GX using free-to-use Victron Remote Management Portal (VRM).