Weight | 5.0 kg |
---|---|
Dimensions | 29 × 26 × 15 cm |
Victron Energy SmartSolar MPPT 250/100-MC4 Solar Charge Controller
$ 1,383.72 $ 1,226.43
SmartSolar charge controller
The Victron Energy SmartSolar MPPT 250/100-MC4 Solar Charge Controller gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by Bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
By adding the SmartSolar Control Display you will be able to check the status of your Charger and battery-storage at a glance. Simply plug it into the face of your MPPT charger to provide you with real-time monitoring and set-up capabilities.
Features and Specifications:
– Ultra-fast Maximum Power Point Tracking (MPPT)
– Advanced Maximum Power Point Detection in case of partial shading conditions
– Outstanding conversion efficiency
– Flexible charge algorithm
– Internal temperature sensor
– Bluetooth Smart built-in: dongle not needed
– Programmable relay
– Optional: pluggable LCD display
– 5 year warranty
Related products
SunLight-20
SunLight 20 Controller by Morningstar
The SunLight 20 combines the SunSaver design with an advanced micro controller for automatic lighting control functions.
Features:
- rotary digital switch to select among 10 lighting options.
- A test button flashes red LED to confirm correct rotary switch selection.
- Rated 20 amps at 12 volts.
- Five year warranty.
TriStar 45 amp Controller
Morningstar’s TriStar 45 amp Controller is a three-function controller that provides reliable solar battery charging, load control or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions.
Available in 45 or 60 amps at 12-48 volts, and has an optional meter, remote meter and remote temperature sensor.
Photo shown has the optional meter display installed on front of unit.
Five year warranty. Contact Morningstar for complete terms.

Victron Energy SmartSolar 150/85 TR VE Can MPPT solar charge controller
Victron Energy 150/85 TR VE CAN MPPT Solar Charge Controller
Why buy Victron from Canadian Solar Wholesale?
With the IPS company group, we buy directly from Victron Energy. Our warehouse is the only authorized Victron warranty and repair center in Western Canada.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
Features and Specifications:
- Bluetooth Smart built-in: dongle not needed
- VE.Direct data connection
- Ultra-fast Maximum Power Point Tracking (MPPT)
- Advanced Maximum Power Point Detection in case of partial shading conditions
- Outstanding conversion efficiency
- Flexible charge algorithm
- Extensive electronic protection
- Internal temperature sensor
- Real-time data display options
- Rated charge current: 85 Amps
- Maximum PV open circuit voltage: 150 Volts
- 5 year warranty
SunLight20
SunLight 20 Controller by Morningstar
The SunLight 20 combines the SunSaver design with an advanced micro controller for automatic lighting control functions.
Features:
- rotary digital switch to select among 10 lighting options.
- A test button flashes red LED to confirm correct rotary switch selection.
- Rated 20 amps at 12 volts.
- Five year warranty.
SunSaver-20L
Sunsaver 20L : a small solar controller for professional and consumer applications.
The SunSaver features
- setpoint accuracy to 35 mV’s,
- low voltage disconnect,
- temperature compensation,
- sealed/flooded battery select,
- and true 0 to 100% pulse width modulation (PWM) duty cycle.
- Rated 20 amps at 12 volts.
- Five year warranty.
Midnite Classic 200MPPT
The Classic MPPT Charge Controller substantially increases the flexibility, features and range currently found on MPPT controllers. The Classic is the first MPPT controller that has Arc Fault Protection, making this controller the safest available today.
FEATURES:
- 200 operating voltage
- Max current out: 79 amps
- 12-72V battery charging standard with models up to 120V battery bank
- Built in DC-GFP and Arc Fault Detector
- Solar, wind and hydro MPPT modes
- Set up Wizard
- 32 megs of data logging
Listed by ETL for US & Canada CE Certified
SunSaver-10L
Sunsaver 10L : a small solar controller for professional and consumer applications.
The SunSaver’s 100% solid state design features
- setpoint accuracy to 35 mV’s,
- low voltage disconnect,
- temperature compensation,
- sealed/flooded battery select,
- and true 0 to 100% pulse width modulation (PWM) duty cycle.
- Rated 10 amps at 12 volts.
- Five year warranty.
TriStar 60 amp Controller
MorningStar TriStar Controller is a three function controller that provides reliable solar battery charging, load control or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions.
Available in 45 or 60 amps at 12-48 volts, and has an optional meter, remote meter and remote temperature sensor.
Photo shown has the optional display meter installed on front of unit.
Five year warranty. Contact MornigStar for complete terms.